1 ton cab & chassis questions - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-30-2011, 07:33 AM

Edit: Ok,after posting that picture I see these mirrors were installed incorrectly. Guess I'll have to drill another set of holes and fill another set

. My truck has had the cab swapped from a 1/2t,so the mirrors were put onto those doors by whoever did all that. The driver door that got damaged is rust free! I just can't get over how stupid that was

(

)

bobs409 · 06-30-2011, 10:11 AM

Quote:

Originally Posted by special-K

Edit: The driver door that got damaged is rust free! I just can't get over how stupid that was

(

)

It's always that way!

I know I've seen a truck with the "flyswatter" mirrors somewhere. Probably in a junkyard in the past. If I ever find a pair, I'm getting them to just keep with the truck. (unless they grow on me and I install them)

I'll save my brackets too.

I could keep the type that was on it, they look good. Those look like the ones my C20 had when I got it. (I switched to the sport type on that one)

bobs409 · 06-30-2011, 10:13 AM

My edit button is gone too. ?

Any chance the mirrors on your wrecker are from an 80's Ford truck? I've seen that type somewhere before too.

**special-K** · 06-30-2011, 06:30 PM

The mirrors that are on it now could be Ford or aftermarket. You see them a lot as generic aftermarket but are based on the ford mirror.

coops714x4 · 07-11-2011, 01:16 PM

Hey Bob I found a pair of the fly-swatter mirrors, the mirror glass was broke and the guy still wanted $125.00 for them

bobs409 · 07-11-2011, 02:33 PM

Ya know, these mirrors are growing on me a bit. But not for $125 dollars.

I'll make my decision when I actually see them in person.

**special-K** · 07-11-2011, 08:51 PM

You need the senior west coasts. They were available and I guarantee Vic wished he had 'em

bobs409 · 09-22-2011, 09:39 PM

Well, I'm learning that finding these standard long arm mirrors is almost impossible! I haven't found any yet and I've been actively searching all over the place. Standard mirrors and they are like digging for gold.

Does anyone here own a pair of these "fly swatter" mirrors? I need the length of both arms (in case they are different from side to side) Also what size mirror heads did these have? I guess the angle of the arms would be helpful too.

I'm going to be installing new door skins soon and I'm commited to going with this style no matter how long it takes to locate them. (yep, they grew on me)

I'll be installing the backing plates which I have and putting the holes in the skin prior to paint. I'm thinking I will "build" a set of these to get by for now. Can't be that hard but I would like the correct lengths if anyone can help.

Thanks

factorystock · 09-24-2011, 05:30 PM

Yes, Joesjunk got it right! Those were the standard mirrors on your truck. Here is another shot with these mirrors on a dual wheel C 30. Good Chevy truck trivia! This will help keep history alive!

factorystock · 09-24-2011, 05:49 PM

More factual info.

bobs409 · 09-24-2011, 06:54 PM

Thanks for the great pics! I didn't realize it was 2 brackets. Now I just wish I could locate a decent set.

I'll have to make something up temporarily as I want to put the correct holes in the door skin.

And the search goes on...

coops714x4 · 10-27-2011, 02:03 PM

Bob I have been following your wrecker resto. and now the bug has bit me too. I have found a 71 C30 that I am considering buying, If I buy it, it has the mounts and arms for these mirrors, the mirror heads are gone tho. If I get it Ill give you the mounts and arms. Coop

bobs409 · 10-27-2011, 02:15 PM

Quote:

Originally Posted by coops714x4

Bob I have been following your wrecker resto. and now the bug has bit me too. I have found a 71 C30 that I am considering buying, If I buy it, it has the mounts and arms for these mirrors, the mirror heads are gone tho. If I get it Ill give you the mounts and arms. Coop

That would be AWESOME!!! I'll have to put you in my will or something.

I have had no luck finding anything so far.

Congrats on the new toy if you get it.

no moa · 10-27-2011, 02:19 PM

Oh heavens no, dont do it! those are HORRID mirrors! lol

bobs409 · 10-27-2011, 02:24 PM

Have to, can't fight the urge!

Besides, I am known for being different.

68panelman · 10-27-2011, 02:37 PM

These came off a 69' C-60. Mirror heads have been changed. Originals have an embossed/ raised oval that ran the length of the mirror.

bobs409 · 10-27-2011, 02:43 PM

Those aren't the flyswater mirrors. It would be a single long arm with a rectangular mirror.

68panelman · 10-27-2011, 02:46 PM

Correct, Was not sure of the style you wanted yet.

helldiablo · 10-27-2011, 02:47 PM

aww man, those mirrors are ugly yet awsome.... thanks guys... now i have to find a set...

no moa · 10-27-2011, 02:49 PM

We know your different, but strive to be like us more. Lol.
Posted via Mobile Device

coops714x4 · 10-27-2011, 05:07 PM

Bob the deal isn't made yet. I want the truck but the guy is a bit high on the price, I made him a offer and he said he would think about it. so I'll have to wait and see. If I get it I'll give em to ya. (don't want "flyswatters" on my truck) LOL ... The truck is a 71 C30 with a UGLY flatbed on it. I have bought a complete Holmes 440 wrecker bed that I will put on it. not being quite the purist you are I am going to put the truck style mirrors on it. speaking of wreckers... please bring the build page up to date, would like to see what else you have gotten done. Coop

bobs409 · 10-27-2011, 06:12 PM

I have the info and pictures almost ready for an update, just need a little more time. I've stopped work on the wrecker lately as I had to get back to the full floor replacement on my 63 Impala. I think I need to hire a helper! If I ever hit the big lottery, I'm hiring a personal assistant!

Hope to update very soon on the wrecker thread.

06-30-2011, 07:33 AM	#26
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1 ton cab & chassis questions Edit: Ok,after posting that picture I see these mirrors were installed incorrectly. Guess I'll have to drill another set of holes and fill another set . My truck has had the cab swapped from a 1/2t,so the mirrors were put onto those doors by whoever did all that. The driver door that got damaged is rust free! I just can't get over how stupid that was () __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-30-2011, 10:13 AM	#28
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions My edit button is gone too. ? Any chance the mirrors on your wrecker are from an 80's Ford truck? I've seen that type somewhere before too. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

06-30-2011, 06:30 PM	#29
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1 ton cab & chassis questions The mirrors that are on it now could be Ford or aftermarket. You see them a lot as generic aftermarket but are based on the ford mirror. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

07-11-2011, 01:16 PM	#30
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: 1 ton cab & chassis questions Hey Bob I found a pair of the fly-swatter mirrors, the mirror glass was broke and the guy still wanted $125.00 for them __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

07-11-2011, 02:33 PM	#31
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions Ya know, these mirrors are growing on me a bit. But not for $125 dollars. I'll make my decision when I actually see them in person. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

07-11-2011, 08:51 PM	#32
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: 1 ton cab & chassis questions You need the senior west coasts. They were available and I guarantee Vic wished he had 'em __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-22-2011, 09:39 PM	#33
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions Well, I'm learning that finding these standard long arm mirrors is almost impossible! I haven't found any yet and I've been actively searching all over the place. Standard mirrors and they are like digging for gold. Does anyone here own a pair of these "fly swatter" mirrors? I need the length of both arms (in case they are different from side to side) Also what size mirror heads did these have? I guess the angle of the arms would be helpful too. I'm going to be installing new door skins soon and I'm commited to going with this style no matter how long it takes to locate them. (yep, they grew on me) I'll be installing the backing plates which I have and putting the holes in the skin prior to paint. I'm thinking I will "build" a set of these to get by for now. Can't be that hard but I would like the correct lengths if anyone can help. Thanks __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

09-24-2011, 05:30 PM	#34
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: 1 ton cab & chassis questions Yes, Joesjunk got it right! Those were the standard mirrors on your truck. Here is another shot with these mirrors on a dual wheel C 30. Good Chevy truck trivia! This will help keep history alive! Attached Images

09-24-2011, 05:49 PM	#35
factorystock Registered User Join Date: Feb 2007 Location: west coast Posts: 3,396	Re: 1 ton cab & chassis questions More factual info. Attached Images

09-24-2011, 06:54 PM	#36
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions Thanks for the great pics! I didn't realize it was 2 brackets. Now I just wish I could locate a decent set. I'll have to make something up temporarily as I want to put the correct holes in the door skin. And the search goes on... __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

10-27-2011, 02:03 PM	#37
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: 1 ton cab & chassis questions Bob I have been following your wrecker resto. and now the bug has bit me too. I have found a 71 C30 that I am considering buying, If I buy it, it has the mounts and arms for these mirrors, the mirror heads are gone tho. If I get it Ill give you the mounts and arms. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-27-2011, 02:19 PM	#39
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: 1 ton cab & chassis questions Oh heavens no, dont do it! those are HORRID mirrors! lol __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

10-27-2011, 02:24 PM	#40
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions Have to, can't fight the urge! Besides, I am known for being different. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10 Last edited by bobs409; 10-27-2011 at 02:43 PM.

10-27-2011, 02:37 PM	#41
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: 1 ton cab & chassis questions These came off a 69' C-60. Mirror heads have been changed. Originals have an embossed/ raised oval that ran the length of the mirror. Attached Images

10-27-2011, 02:43 PM	#42
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions Those aren't the flyswater mirrors. It would be a single long arm with a rectangular mirror. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10



Register or Log In To remove these advertisements.

10-27-2011, 02:46 PM	#43
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,462	Re: 1 ton cab & chassis questions Correct, Was not sure of the style you wanted yet.

10-27-2011, 02:47 PM	#44
helldiablo Registered User Join Date: Nov 2010 Location: northern california Posts: 105	Re: 1 ton cab & chassis questions aww man, those mirrors are ugly yet awsome.... thanks guys... now i have to find a set... __________________ *The two most important lessons to wrenchin'-1.The only time you have too much fuel is when you're on fire-2. If something hasn't broken, it's about to--*

10-27-2011, 02:49 PM	#45
no moa Registered User Join Date: Nov 2009 Location: maine Posts: 2,315	Re: 1 ton cab & chassis questions We know your different, but strive to be like us more. Lol. Posted via Mobile Device __________________ 1972 C10 Deluxe.Shortbed. 402/400. A/C, white interior, needs complete restore. Project Red, white and blue. Used to be a Longbed apperently. http://67-72chevytrucks.com/vboard/s...d.php?t=451950 1971 c10 step 250 3 OTT 1969 c30 TOW-MATER. 307 4 speed, holmes 440 body. http://67-72chevytrucks.com/vboard/s...d.php?t=451082 2006 CTS-V LS2 6spd.

10-27-2011, 05:07 PM	#46
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: 1 ton cab & chassis questions Bob the deal isn't made yet. I want the truck but the guy is a bit high on the price, I made him a offer and he said he would think about it. so I'll have to wait and see. If I get it I'll give em to ya. (don't want "flyswatters" on my truck) LOL ... The truck is a 71 C30 with a UGLY flatbed on it. I have bought a complete Holmes 440 wrecker bed that I will put on it. not being quite the purist you are I am going to put the truck style mirrors on it. speaking of wreckers... please bring the build page up to date, would like to see what else you have gotten done. Coop __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

10-27-2011, 06:12 PM	#47
bobs409 1969 Custom 30 wrecker Join Date: Sep 2001 Location: Pottsville, Pa Posts: 2,611	Re: 1 ton cab & chassis questions I have the info and pictures almost ready for an update, just need a little more time. I've stopped work on the wrecker lately as I had to get back to the full floor replacement on my 63 Impala. I think I need to hire a helper! If I ever hit the big lottery, I'm hiring a personal assistant! Hope to update very soon on the wrecker thread. __________________ Bob 63 Impala 283/PG/3.36 (under restoration) 66 Impala 327/PG/3.36 66 Chevelle SS 409/M22/3.55 69 Chevelle 307/PG/3.08 (future restoration) 69 C10 short stepside 454/TH350/3.73 69 Custom 30 tow truck 350/4 spd/4.10 (resto done, CRUISIN TIME!) 71 Cheyenne 20 fleetside 350/4 spd/4.10 71 Chevelle 6/PG/3.08 72 Chevelle 454/M21/4.10

Register or Log In To remove these advertisements.