Here's what I need to do, Any ideas? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Leadfoot Lambert · 11-21-2011, 10:41 PM

The Tach swap thread gave me this idea. If a tach can be swapped in why not a speedometer head? I have a NV3500 tranny in my truck, it has a electronic speedometer output, no place for a cable. I want to gut out my factory cable driven speedometer assy from the gauge cluster and install the speedometer mechanism from the truck that the tranny came from while still using the stock face plate and needle. Has anyone pulled this magic trick off?

padresag · 11-21-2011, 10:58 PM

here is another way of doing it
http://abbott-tach.com/Cable%20X.html
ron

**Captainfab** · 11-22-2011, 01:30 AM

I have had that same thought, although I have not done it. I just don't know how 'simple' it would be to wire up and make work. It is a possibility that the pcm will be needed for the speedo to operate. Then you also need to have an electronic speedo that has the same sweep and the same distance between the mph marks.

Leadfoot Lambert · 11-22-2011, 10:06 PM

I have seen the cable-x system before, I was hoping to get it working cheaper than $300. captain fab has some good points tho.
Posted via Mobile Device

11-21-2011, 10:41 PM	#1
Leadfoot Lambert Registered User Join Date: Jan 2011 Location: Saco, Maine Posts: 377	Here's what I need to do, Any ideas? The Tach swap thread gave me this idea. If a tach can be swapped in why not a speedometer head? I have a NV3500 tranny in my truck, it has a electronic speedometer output, no place for a cable. I want to gut out my factory cable driven speedometer assy from the gauge cluster and install the speedometer mechanism from the truck that the tranny came from while still using the stock face plate and needle. Has anyone pulled this magic trick off? __________________ 65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz

11-21-2011, 10:58 PM	#2
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: Here's what I need to do, Any ideas? here is another way of doing it http://abbott-tach.com/Cable%20X.html ron

11-22-2011, 01:30 AM	#3
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: Here's what I need to do, Any ideas? I have had that same thought, although I have not done it. I just don't know how 'simple' it would be to wire up and make work. It is a possibility that the pcm will be needed for the speedo to operate. Then you also need to have an electronic speedo that has the same sweep and the same distance between the mph marks. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-22-2011, 10:06 PM	#4
Leadfoot Lambert Registered User Join Date: Jan 2011 Location: Saco, Maine Posts: 377	Re: Here's what I need to do, Any ideas? I have seen the cable-x system before, I was hoping to get it working cheaper than $300. captain fab has some good points tho. Posted via Mobile Device __________________ 65 Chevy short fleet 350 5 speed, soon to be LSX powered 65 F100 short fleet 91 Heritage softail 94 Fatboy 11 Softail Deluxe [wife's bike] 13 Streetglide http://www.youtube.com/watch?v=yMFMw...eature=mh_lolz



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.