Manual Choke Installation?

[savatreatabvr]

I've tried WD-40, penetrating fluid and grease but since there's two 90 degree bends in the cable I doubt anything will work to make it slide easier! I tried rerouting the cable but didn't find a better way to route it.

Originally Posted by tucsonjwt

My problem with all automatic chokes in cold weather is that they stay on too long in very cold weather. If you are driving on icy roads the engine is racing and you cannot take off from a stop sign on icy roads without spinning the rear wheels. So, I have had the opposite problem. You can control the amount of choke with a manual choke, not possible with an automatic choke, unless your manual choke is not functioning properly, so apply graphite or lithium grease to the cable.