Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
12-08-2011, 01:17 PM | #1 |
Who Me?
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,067
|
99 S-10 V6 OBD port not working
I have a CEL and plugged in my low buck scanner to pull a code. THe display on the scanner did nothing. This is a working scanner, I tried it on my Tahoe with no issues.
I found info about it getting power from the cig lighter, but the lighter is working. Anything else I can check? Thanks for your help!
__________________
Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold) |
12-08-2011, 08:03 PM | #2 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: 99 S-10 V6 OBD port not working
thast it unless theres a sort in the wiring or the computer is dead
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
12-08-2011, 08:04 PM | #3 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: 99 S-10 V6 OBD port not working
normally its the cig fuse check it just to be safe
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
12-09-2011, 09:42 AM | #4 |
Who Me?
Join Date: Sep 2010
Location: Royal Palm Beach, FL
Posts: 4,067
|
Re: 99 S-10 V6 OBD port not working
Cig fuse is fine and the truck runs normal so the ECM is not dead. It may be tied to another fuse under the hood. I will need to check one by one.
__________________
Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold) |
12-09-2011, 05:33 PM | #5 |
Senior Member
Join Date: Sep 2005
Location: Lewisville, Nc
Posts: 10,238
|
Re: 99 S-10 V6 OBD port not working
obd 2 port is run on the cigar fuse in those trucks you can use a test light to see if one pin the plug should be hot all the time that's the power for the port. ecm can be dead and still run fine though it is unlikely that the ecm is dead
__________________
David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube |
Bookmarks |
|
|