opinions PLEASE - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1sik7t2 · 12-12-2011, 03:07 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

ol_skool_chevy · 12-12-2011, 03:16 PM

longbed67 · 12-12-2011, 03:17 PM

Quote:

Originally Posted by ol_skool_chevy

x2

1sik7t2 · 12-12-2011, 03:25 PM

come on guys, it was a driving along and "look, theres a burb, wonder if he'd sell it?" no pictures yet, but opinions anyway please

Quote:

Originally Posted by ol_skool_chevy

vectorit · 12-12-2011, 03:27 PM

If you can get it cheap, and have the room to store it - I say go for it!

**kev2809** · 12-12-2011, 06:54 PM

^^^ agreed. does it have any "rare" options? worth a shot if its a decent price, but remember, you would just be picking it apart so dont go crazy on the price.

plus i need another gate

1sik7t2 · 12-12-2011, 07:32 PM

it's barn doors....and what would special options be???

Quote:

Originally Posted by kev2809

^^^ agreed. does it have any "rare" options? worth a shot if its a decent price, but remember, you would just be picking it apart so dont go crazy on the price.

plus i need another gate

**kev2809** · 12-12-2011, 07:41 PM

barn doors? pass it up!

jk... lol. im talking about buddy buckets, tilt column, third seat, speedo cluster, maybe all good trim..etc

im not exactly sure if the suburbans have options like the trucks do, but worth a look.

vectorit · 12-12-2011, 07:44 PM

68 burbs didn't have much for special options, not unlike the later models like a 1972.

The 307 was the lower end of the v8 option list, and as well for the 3 on the tree transmission.

The the front axle will be closed knuckle if original, and if you plan to build this rig that is a hefty upgrade to go to disc. By the time you factor in gears, hubs, the axle assembly, and the labor to put it all together and install it.

The seats are the only really cushy upgrade item for the 67/68's, from plain vinyl to the cloth and vinyl option. Plus getting all 3 benches was an upgrade option.

A lot of the AC options were aftermarket dealer installed units.

Tow hooks were an option.

Larger or twin fuel tanks were a dealer installed option for the most part.

Tinted glass was optional as well.

Padded vinyl door panels were part of the "Custom" package, which a lot of the times included the cloth/vinyl seats.

Many of the other "optional" things later became standard after 1968.

Flint70step · 12-12-2011, 08:44 PM

If it has a good head liner you can add that to the list of resell items.If you do get it and the headliner is good....I'll take it

Third and 4th door, door panels are good items as well.A lot of burb stuff is not repop'd.If you can get it cheap you should be able to get your money back and then some.You may even help a board member find a part(s) they need

Street Smart · 12-12-2011, 08:57 PM

Quote:

Originally Posted by vectorit

If you can get it cheap, and have the room to store it - I say go for it!

x2, Give it a day or two then go back a second time to look at it, see if it looks better or worse then you remember.
I live in the city, if i had a place to let stuff sit I`d be in trouble.

1sik7t2 · 12-12-2011, 10:01 PM

yeah he's asking 500, i offered 300...both seats are vinyl bench (i need 1) good bumpers. has hitch, all door panels all steel and good,,has a second tank owner added behind rear seat..eeehh...not sure on tilt, has no tach, no headliner. not sure about ac.....uuuummm...we have a big swap meet in feb comin up so id have a place to part it at, that part would be good...decisions, decisions

Quote:

Originally Posted by vectorit

68 burbs didn't have much for special options, not unlike the later models like a 1972.

The 307 was the lower end of the v8 option list, and as well for the 3 on the tree transmission.

The the front axle will be closed knuckle if original, and if you plan to build this rig that is a hefty upgrade to go to disc. By the time you factor in gears, hubs, the axle assembly, and the labor to put it all together and install it.

The seats are the only really cushy upgrade item for the 67/68's, from plain vinyl to the cloth and vinyl option. Plus getting all 3 benches was an upgrade option.

A lot of the AC options were aftermarket dealer installed units.

Tow hooks were an option.

Larger or twin fuel tanks were a dealer installed option for the most part.

Tinted glass was optional as well.

Padded vinyl door panels were part of the "Custom" package, which a lot of the times included the cloth/vinyl seats.

Many of the other "optional" things later became standard after 1968.

jmedero · 12-12-2011, 11:12 PM

Dude for $500 you can pull some parts off of it like trim, grille, and your seat and scrap the rest and get at least $300. Why not.
Posted via Mobile Device

**kev2809** · 12-12-2011, 11:30 PM

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

longbed67 · 12-13-2011, 09:34 AM

For that price you would be foolish not to snap it up!

budnikguy · 12-13-2011, 11:54 AM

that is a $$ maker at that price!

**70cst** · 12-17-2011, 01:12 AM

What did you do?

1sik7t2 · 12-19-2011, 02:41 PM

nuthin yet....it's in a place not many people would see....plus shes uuuuuglllyyyy......but has potential....just trying to figure where to put it to tear it down.....and piece it out...

Quote:

Originally Posted by 70cst

What did you do?

botmfedr1 · 12-19-2011, 08:04 PM

Hey,

what's the sheet metal look like? if your gonna part it out i am interested in both lower quarters...

12-12-2011, 03:07 PM	#1
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	opinions PLEASE Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ check out my build "DIRTY BURB" Last edited by 70cst; 12-24-2011 at 11:41 AM.

12-12-2011, 03:16 PM	#2
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: opinions PLEASE __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

12-12-2011, 03:27 PM	#5
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: opinions PLEASE If you can get it cheap, and have the room to store it - I say go for it! __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

12-12-2011, 06:54 PM	#6
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: opinions PLEASE ^^^ agreed. does it have any "rare" options? worth a shot if its a decent price, but remember, you would just be picking it apart so dont go crazy on the price. plus i need another gate __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-12-2011, 07:41 PM	#8
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: opinions PLEASE barn doors? pass it up! jk... lol. im talking about buddy buckets, tilt column, third seat, speedo cluster, maybe all good trim..etc im not exactly sure if the suburbans have options like the trucks do, but worth a look. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

12-12-2011, 07:44 PM	#9
vectorit What? Join Date: Jun 2007 Location: Southern California Posts: 7,617	Re: opinions PLEASE 68 burbs didn't have much for special options, not unlike the later models like a 1972. The 307 was the lower end of the v8 option list, and as well for the 3 on the tree transmission. The the front axle will be closed knuckle if original, and if you plan to build this rig that is a hefty upgrade to go to disc. By the time you factor in gears, hubs, the axle assembly, and the labor to put it all together and install it. The seats are the only really cushy upgrade item for the 67/68's, from plain vinyl to the cloth and vinyl option. Plus getting all 3 benches was an upgrade option. A lot of the AC options were aftermarket dealer installed units. Tow hooks were an option. Larger or twin fuel tanks were a dealer installed option for the most part. Tinted glass was optional as well. Padded vinyl door panels were part of the "Custom" package, which a lot of the times included the cloth/vinyl seats. Many of the other "optional" things later became standard after 1968. __________________ Chris 1968 K20 Suburban 1972 K10 LWB PU

12-12-2011, 08:44 PM	#10
Flint70step Registered User Join Date: Jan 2011 Location: Lake Travis,Texas Posts: 586	Re: opinions PLEASE If it has a good head liner you can add that to the list of resell items.If you do get it and the headliner is good....I'll take itThird and 4th door, door panels are good items as well.A lot of burb stuff is not repop'd.If you can get it cheap you should be able to get your money back and then some.You may even help a board member find a part(s) they need __________________ 72 Cheyenne Super LWB 350/350 Factory A/C Tilt/Posi White/Med Red/White(on the way) 72 Custom Deluxe Burb(Arizona truck)Nice interior Great patina Project Patina Azul http://67-72chevytrucks.com/vboard/s...d.php?t=467668

12-12-2011, 11:12 PM	#13
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: opinions PLEASE Dude for $500 you can pull some parts off of it like trim, grille, and your seat and scrap the rest and get at least $300. Why not. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-12-2011, 11:30 PM	#14
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,193	Re: opinions PLEASE Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by 70cst; 12-24-2011 at 11:40 AM.

12-13-2011, 09:34 AM	#15
longbed67 Registered User Join Date: Jun 2011 Location: Monroe, WI Posts: 1,415	Re: opinions PLEASE For that price you would be foolish not to snap it up! __________________ *Adam* My 1967 C10 - Turbo 250 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=485843 (608) 214-8706

12-13-2011, 11:54 AM	#16
budnikguy Registered User Join Date: Sep 2007 Location: Riverside, CA Posts: 4,316	Re: opinions PLEASE that is a $$ maker at that price!

12-17-2011, 01:12 AM	#17
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,377	Re: opinions PLEASE What did you do? __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

12-19-2011, 08:04 PM	#19
botmfedr1 Registered User Join Date: Feb 2008 Location: Harlingen, TX Posts: 1,097	Re: opinions PLEASE Hey, what's the sheet metal look like? if your gonna part it out i am interested in both lower quarters...



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.