Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-08-2012, 08:09 PM | #1 |
Registered User
Join Date: Nov 2011
Location: South Dakota
Posts: 916
|
Cleaning up the motor...what to use?
My motor needs some cleaning up. its got a lot of gunk and crap from oil leaks etc and it looks horrid. I tried cleaning it in the summer but it didnt get as clean as I wanted it. I used engine brite engine cleaner but that didn't work too well. what do u guys use to clean ur motors. any advice is appreciated.
|
01-08-2012, 08:48 PM | #2 |
Getting Old; Going Broke
Join Date: Apr 2010
Location: Owasso OK
Posts: 2,764
|
Re: Cleaning up the motor...what to use?
Super Clean Degreaser
We use that stuff a lot. If you use it straight, you'll strip the paint off the motor as well. We cut it down 1/10 with water and put it in a spray bottle. Works well for cleaning brake dust off of wheels and a general degreaser and cleaner.
__________________
Why is every used 350 sbc out of a corvette? There's only two things that excite a man, expensive toys and real expensive toys. VEGETARIAN: That's an old Indian word meaning "I don't hunt so good." When the going gets tough, switch to power tools. |
01-08-2012, 09:29 PM | #3 |
Account Suspended
Join Date: Aug 2007
Location: USA
Posts: 1,223
|
Re: Cleaning up the motor...what to use?
"Easy off oven cleaner" someone on the forum suggested it once and I gave it a try. best thing iv used yet. Better than that Gunk crap
Last edited by mrhino; 01-08-2012 at 10:19 PM. |
01-08-2012, 09:39 PM | #4 |
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: Cleaning up the motor...what to use?
I amuse the engine bright DEGREASER not the cleaner works well for me. I use a wire brush and usually have the engines out of the vehicle. Then I use vht engine enamel and a clear coat and fix any oil leaks and the engines stay rather clean. Another think to look into is one of those high pressure steam cleaners detail shops use. Those are the best
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
01-08-2012, 11:17 PM | #5 |
Registered User
Join Date: Dec 2011
Location: Arlington WA
Posts: 1,728
|
Re: Cleaning up the motor...what to use?
|
01-09-2012, 12:18 AM | #6 |
Registered User
Join Date: May 2011
Location: Bradford, PA
Posts: 395
|
Re: Cleaning up the motor...what to use?
+1 on the Easy Off. It eats all the gunk off your engine. Just be careful about getting it in your eyes, trust me.
__________________
1981 K10 Scottsdale
305 ci | TH350 | NP208 | 60k miles |
01-09-2012, 12:21 AM | #7 |
Registered User
Join Date: Nov 2011
Location: South Dakota
Posts: 916
|
Re: Cleaning up the motor...what to use?
easy off over cleaner huh? theres something ill have to try. i think i have some in my kitchen somewhere. my engine just looks disgraceful. i seen some nice looking engines on here. wish mine could look like them. even under my engine's covered in gunk and crap.
|
01-09-2012, 12:31 AM | #8 |
Registered User
Join Date: May 2011
Location: Bradford, PA
Posts: 395
|
Re: Cleaning up the motor...what to use?
It would probably eat your spark plug wires, so I'd be careful. That stuff's pretty strong.
__________________
1981 K10 Scottsdale
305 ci | TH350 | NP208 | 60k miles |
01-09-2012, 09:45 AM | #9 |
Arrived on a Pale Horse
Join Date: Mar 2007
Location: SnagTown Indiana
Posts: 2,524
|
Re: Cleaning up the motor...what to use?
Add another vote for the oven cleaner. It really works wonders. I've used it on a few now. You can pick it up at a dollar general for a couple bucks a can. Get 2 or 3 cans and apply liberally.
__________________
Jason 87 V30 350TBI/400 White w/Boss V-plow 89 R3500 CC SRW |
Bookmarks |
|
|