engine identification - The 1947 - Present Chevrolet & GMC Truck Message Board Network

biglou55 · 09-02-2003, 06:39 AM

I bought a 69 one ton for parts . the p.o. said it had a 350 that came out of a camaro that originally came out of a vette, One friend says it,s a 305 another friend sa,ys it,s a327 can somebody tell me a good site to look up these numbers. they are from the front passenger side of motor 152137928 the other number is in larger text, t02040zt if anyone can help decypher these it would help me decide if i want to rebuild it.

JimKshortstep4x4 · 09-02-2003, 07:29 AM

Can you verify the pad information? It does not correspond with any listings that I can find. Here is a good site.

Jim

http://www.nastyz28.com/spmenu.html

biglou55 · 09-02-2003, 07:52 AM

I have checked the numbers four times they are the correct ones.

Locutus · 09-02-2003, 08:00 AM

Look on the back of the engine, on the drivers side, just in front of where the tranny bolts up. You may have to clean off loads of dirt ad grease but there should be numbers there. Those numbers usually tell you with out a doubt what it is(note usually).

Mike

biglou55 · 09-02-2003, 08:29 AM

the numbers on that pad are GM 355909 i hope this helps.

Z28Owner · 09-02-2003, 08:53 AM

355909.....262.....75....2
355909.....305...76-79...2

Longhorn Man · 09-02-2003, 11:11 PM

ewwwww.
ever notice that all 350's for sale are LT-1 350's, and all 327's are Corvette 327's?
I hate it when they do that.
That 69 one ton wouldn't have a fleet side bed on it would it?

09-02-2003, 06:39 AM	#1
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	engine identification I bought a 69 one ton for parts . the p.o. said it had a 350 that came out of a camaro that originally came out of a vette, One friend says it,s a 305 another friend sa,ys it,s a327 can somebody tell me a good site to look up these numbers. they are from the front passenger side of motor 152137928 the other number is in larger text, t02040zt if anyone can help decypher these it would help me decide if i want to rebuild it. __________________ Certifiably crazy person

09-02-2003, 07:52 AM	#3
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	I have checked the numbers four times they are the correct ones. __________________ Certifiably crazy person

09-02-2003, 08:29 AM	#5
biglou55 Senior Member Join Date: Sep 2002 Location: Greenfield Mass. Posts: 551	the numbers on that pad are GM 355909 i hope this helps. __________________ Certifiably crazy person

09-02-2003, 08:53 AM	#6
Z28Owner ......................... Join Date: Nov 2001 Location: benton, ky Posts: 285	355909.....262.....75....2 355909.....305...76-79...2 __________________ 1971 LWB Chevy C-10 350/350 3:42 eaton

09-02-2003, 07:29 AM	#2
JimKshortstep4x4 Senior Member Join Date: Jul 2001 Location: Muskegon,MI,USA Posts: 6,026	Can you verify the pad information? It does not correspond with any listings that I can find. Here is a good site. Jim http://www.nastyz28.com/spmenu.html

09-02-2003, 08:00 AM	#4
Locutus Registered User Join Date: Jan 2003 Location: Santa Fe, Texas Posts: 249	Look on the back of the engine, on the drivers side, just in front of where the tranny bolts up. You may have to clean off loads of dirt ad grease but there should be numbers there. Those numbers usually tell you with out a doubt what it is(note usually). Mike

09-02-2003, 11:11 PM	#7
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	ewwwww. ever notice that all 350's for sale are LT-1 350's, and all 327's are Corvette 327's? I hate it when they do that. That 69 one ton wouldn't have a fleet side bed on it would it?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.