Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-28-2012, 04:47 PM | #1 |
Registered User
Join Date: Jul 2009
Location: Millers, MD
Posts: 36
|
Please help mirror install
Hello, i have a few questions about mirrors.
1. Are the round mirrors with the long ss arms factory on ALL 67's? 2. I am converting my sports mirrors to these ss arms and need to kno the measurement where to drill the holes? I have a 67 cab but i am questioning the year of the doors. there are no previous holes or back plates. Thanks in advanced... Joe |
01-28-2012, 05:37 PM | #2 |
Registered User
Join Date: May 2011
Location: Long Island NY
Posts: 791
|
Re: Please help mirror install
I think if they are original 67 doors there is a difference with the door handle mount. I know the 67 door handles were specefic and Im sure the door had something different inside the door behind the handle. A 67 guy should be able to chime in.
Check out this thread. I can measure the exact spot for those mirrors when I get my cab back next week if no one chimes in sooner http://67-72chevytrucks.com/vboard/s...d.php?t=371898 |
01-28-2012, 05:43 PM | #3 |
CAN'T FIX NOTHIN
Join Date: Sep 2006
Location: SOUTHRUST VIRGINIA !!!
Posts: 2,112
|
Re: Please help mirror install
most but not all 67's had painted mirror arms and mirrors , a lot of the 67's did not even have a mirror on the passenger side at all , the position of the mirror holes on 67 68 is the same
__________________
1967 C10 Shortbed Fleetside Small back glass 6 cyl 3spd on the tree 3.08 gears underdash AC |
01-28-2012, 05:54 PM | #4 |
Registered User
Join Date: Jul 2009
Location: Millers, MD
Posts: 36
|
Re: Please help mirror install
Thanks for the replies. nice to kno i did buy oem style mirrors to keep it close to original. found out the difference of the doors thanks to blkcorvair.. the 67's have a plate on the inside for the outer handle.. i am now sure they're not 67's.. no plate and sports mirrors.. for the time being i need mirrors and my doors are both rotten so im not worried about ruining them. can someone give me the measurements for the round mirrors??.. i made back plates and i am using lock nuts too. thanks
Last edited by workinprogress67; 01-28-2012 at 06:07 PM. |
01-28-2012, 11:03 PM | #5 |
Registered User
Join Date: Jul 2009
Location: Millers, MD
Posts: 36
|
Re: Please help mirror install
Thanks again for the help. i found the measurements. i got 1/2 down and 2 5/8 from the front of the door. will drill when daylight hits.
|
Bookmarks |
|
|