Ditiching the tail gate chains, - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMR-PERFORMANCE · 01-31-2012, 06:44 PM

I have seen seat belt latches used , gate latches, so ideas for a fleet side would be great.

gimmy 64 · 01-31-2012, 07:19 PM

mar-k sells the best one iv'e seen. i bought the hole tailgate and and latching assemble.

**MisterC** · 01-31-2012, 09:56 PM

Quote:

Originally Posted by gimmy 64

mar-k sells the best one iv'e seen. i bought the hole tailgate and and latching assemble.

After looking at many, many options...that is hands down the best option that I've seen and will be the way I go.

**jocko** · 01-31-2012, 10:18 PM

I think it is the best approach to the problem as well. I have not done it yet, maybe if you have the time, you can take some pics of the process and post!? The seat belt approach and some of the others are cool also - but to me they are more for "customs" - the Mar-K approach just looks natural. Some folks leave the little gap in the bodywork where the chain bar was and some weld em in.

rbar · 01-31-2012, 10:52 PM

I used MAR-K and I'm very happy with it. The thing I've wondered about on the seat belt approach is that I see them welded in and what if it breaks or starts rusting? Alot messier to replace it then. The metal arms in the kit worked out well to.
Posted via Mobile Device

1Bad62Pro/Street · 01-31-2012, 11:21 PM

Swinging tailgates:

**Clyde65** · 02-01-2012, 10:52 AM

I got rid of them too, I took the loop that the hook goes into off, used some of those slide locks attached to the tailgate and drilled a hole in the stake pocket so the pin goes into the hole. cheap and quick. Ill get pics if yall want me to

GMR-PERFORMANCE · 02-01-2012, 11:02 AM

The mark K kit I knew about and was wondering if there was anything else. Grabbed a stock gate for 45 bucks. Was driving down a side street and happen to see it leaning against a fence. No dents or rust!!!! My old one was smashed in badly.

The swing out looks cool but not for me, I thought about slicing open my gate and adding in late style GM latches with the main latch on the inside. At this point I want simple,... I wanna drive my truck HA HA

IS there a swing out kit? as what I read it had to be fabbed up.

scottveazie · 02-01-2012, 12:40 PM

I like the simplicity of the mar-k kit, but I also like the look of the stock chains. What if I just used the innards (the strap supports when open) and kept the chains on the outside to secure it closed? Does that sound stupid?

PAPA KENT · 02-01-2012, 12:41 PM

here are some pictures of mine.this truck started out fawn then was painted met.gold then white,and the white was very old when i purchased the truck. and with the quality of the body work between the gold and the white i could easily see that these latches were installed when the gold was applied which looked to be many years ago.the buckles are rust free and work very well.i ha'vnt had to use lubricant on them and the installation of course is simple though i wish it still retained it's chains.

good luck!

61_FL_Apache · 02-01-2012, 01:26 PM

Do you have one on each side? If so, do you find it awkward to push both of them and open the tailgate at the same time? I like the idea and its very clean.

GMR-PERFORMANCE · 02-01-2012, 01:30 PM

Yes they do run them on both sides and I can just reach both latches with the tips of my fingers. Maybe a guy that is 6'2 with longer arms would be able to do it easier, that is one reason I am not sold on the seat belt idea. Very cool and creative, but my arms are just not long enough..

61_FL_Apache · 02-01-2012, 02:01 PM

I'm 6-0 and can probably reach, but wonder if it would be better to just run with one latch. I dont have chains anymore and im using slide bolt latches in the inside. It works, but not the best look.

jason65 · 02-01-2012, 02:15 PM

I have the Mar-K tailgate with the latches and handle built in. It works and looks great.

rbar · 02-01-2012, 03:13 PM

I can easily reach both MAR-K knobs, but if you can't, each one will lock open with a twist, which is also nice for not forgetting and closing the tailgate with the rods out and damage the back of the bed sides.
Posted via Mobile Device

PAPA KENT · 02-01-2012, 03:25 PM

Quote:

Originally Posted by 61_FL_Apache

Do you have one on each side? If so, do you find it awkward to push both of them and open the tailgate at the same time? I like the idea and its very clean.

yes,one on each side.gmr mentioned reaching both latches at the same time might be a problem and that would be true for me but i'm 6'0 so that is'nt a problem but the cool part is i put a small bubber bumper in on one side to keep the gate from rattling and it keeps just enough tension on one side so you can open one at a time with no problems and that would'nt cost you much money.

Iron-Butt · 02-02-2012, 06:42 AM

I have the Mar-k latckes and they work great

bigdlb12 · 02-02-2012, 02:35 PM

Quote:

Originally Posted by PAPA KENT

here are some pictures of mine.this truck started out fawn then was painted met.gold then white,and the white was very old when i purchased the truck. and with the quality of the body work between the gold and the white i could easily see that these latches were installed when the gold was applied which looked to be many years ago.the buckles are rust free and work very well.i ha'vnt had to use lubricant on them and the installation of course is simple though i wish it still retained it's chains.

good luck!

I like the seat belt locking ones, looks like something I can do myself, but my truck is stepside, wonder how it would look

and if the weather will miss up the seatbelt ones with time

1Bad62Pro/Street · 02-02-2012, 07:36 PM

(( 1960-1966 Chevy/GMC Pickup Truck Restoration/Modification/Customization Ideas
http://67-72chevytrucks.com/vboard/s...d.php?t=402277

Tailgate Latches:
http://67-72chevytrucks.com/vboard/s...d.php?t=402255
http://www.mar-k.com/tailgate_closure.html

01-31-2012, 06:44 PM	#1
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Ditiching the tail gate chains, I have seen seat belt latches used , gate latches, so ideas for a fleet side would be great. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

01-31-2012, 07:19 PM	#2
gimmy 64 Registered User Join Date: Sep 2009 Location: menifee california Posts: 788	Re: Ditiching the tail gate chains, mar-k sells the best one iv'e seen. i bought the hole tailgate and and latching assemble.

01-31-2012, 10:18 PM	#4
jocko Senior Member Join Date: Oct 2009 Location: Godley, TX Posts: 17,975	Re: Ditiching the tail gate chains, I think it is the best approach to the problem as well. I have not done it yet, maybe if you have the time, you can take some pics of the process and post!? The seat belt approach and some of the others are cool also - but to me they are more for "customs" - the Mar-K approach just looks natural. Some folks leave the little gap in the bodywork where the chain bar was and some weld em in.

01-31-2012, 10:52 PM	#5
rbar Registered User Join Date: Nov 2010 Location: Meridian, Idaho Posts: 422	Re: Ditiching the tail gate chains, I used MAR-K and I'm very happy with it. The thing I've wondered about on the seat belt approach is that I see them welded in and what if it breaks or starts rusting? Alot messier to replace it then. The metal arms in the kit worked out well to. Posted via Mobile Device __________________ 1963 Chevy stepside 327 1965 Chevy swb 383 1996 Mystic Mustang Cobra 2009 Pontiac G8 GXP 415hp/415tq 6speed

01-31-2012, 11:21 PM	#6
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Ditiching the tail gate chains, Swinging tailgates: __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

02-01-2012, 10:52 AM	#7
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,546	Re: Ditiching the tail gate chains, I got rid of them too, I took the loop that the hook goes into off, used some of those slide locks attached to the tailgate and drilled a hole in the stake pocket so the pin goes into the hole. cheap and quick. Ill get pics if yall want me to __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

02-01-2012, 11:02 AM	#8
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: Ditiching the tail gate chains, The mark K kit I knew about and was wondering if there was anything else. Grabbed a stock gate for 45 bucks. Was driving down a side street and happen to see it leaning against a fence. No dents or rust!!!! My old one was smashed in badly. The swing out looks cool but not for me, I thought about slicing open my gate and adding in late style GM latches with the main latch on the inside. At this point I want simple,... I wanna drive my truck HA HA IS there a swing out kit? as what I read it had to be fabbed up. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

02-01-2012, 12:40 PM	#9
scottveazie Registered User Join Date: Jun 2011 Location: Vancouver, WA Posts: 92	Re: Ditiching the tail gate chains, I like the simplicity of the mar-k kit, but I also like the look of the stock chains. What if I just used the innards (the strap supports when open) and kept the chains on the outside to secure it closed? Does that sound stupid? __________________ Grandpa's 1965 Chevrolet C20 in the family since new

02-01-2012, 12:41 PM	#10
PAPA KENT Registered User Join Date: Nov 2010 Location: Lolo montana Posts: 361	Re: Ditiching the tail gate chains, here are some pictures of mine.this truck started out fawn then was painted met.gold then white,and the white was very old when i purchased the truck. and with the quality of the body work between the gold and the white i could easily see that these latches were installed when the gold was applied which looked to be many years ago.the buckles are rust free and work very well.i ha'vnt had to use lubricant on them and the installation of course is simple though i wish it still retained it's chains. good luck! Attached Images

02-01-2012, 01:26 PM	#11
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Ditiching the tail gate chains, Do you have one on each side? If so, do you find it awkward to push both of them and open the tailgate at the same time? I like the idea and its very clean. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

02-01-2012, 01:30 PM	#12
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: Ditiching the tail gate chains, Yes they do run them on both sides and I can just reach both latches with the tips of my fingers. Maybe a guy that is 6'2 with longer arms would be able to do it easier, that is one reason I am not sold on the seat belt idea. Very cool and creative, but my arms are just not long enough.. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

02-01-2012, 02:01 PM	#13
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: Ditiching the tail gate chains, I'm 6-0 and can probably reach, but wonder if it would be better to just run with one latch. I dont have chains anymore and im using slide bolt latches in the inside. It works, but not the best look. __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

02-01-2012, 02:15 PM	#14
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Ditiching the tail gate chains, I have the Mar-K tailgate with the latches and handle built in. It works and looks great.

02-01-2012, 03:13 PM	#15
rbar Registered User Join Date: Nov 2010 Location: Meridian, Idaho Posts: 422	Re: Ditiching the tail gate chains, I can easily reach both MAR-K knobs, but if you can't, each one will lock open with a twist, which is also nice for not forgetting and closing the tailgate with the rods out and damage the back of the bed sides. Posted via Mobile Device __________________ 1963 Chevy stepside 327 1965 Chevy swb 383 1996 Mystic Mustang Cobra 2009 Pontiac G8 GXP 415hp/415tq 6speed

02-02-2012, 06:42 AM	#17
Iron-Butt 454 club Join Date: Oct 2002 Location: Oklahoma Posts: 1,348	Re: Ditiching the tail gate chains, I have the Mar-k latckes and they work great __________________ David 1965 Chevrolet c-10 454 automatic Custom bbw swb. 1965 Chevrolet C-10 swb (Sold) 1963 Chevrolet C-10 6 Cyl automatic with dual exhaust, pb, ps and 17's. R.I.P "I will miss you. 1967 Chevrolet C-10 6 Cyl Custom lwb 1939 Chevrolet Coupe, 350 v8 automatic. 1935 Chevrolet 2 Dr Standard in the works. 2015 Harley Davidson Street Glide. 2023 Chevrolet Stingray Z51 Convertible. I never want to grow up.



Register or Log In To remove these advertisements.

02-02-2012, 07:36 PM	#19
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Ditiching the tail gate chains, (( 1960-1966 Chevy/GMC Pickup Truck Restoration/Modification/Customization Ideas http://67-72chevytrucks.com/vboard/s...d.php?t=402277 Tailgate Latches: http://67-72chevytrucks.com/vboard/s...d.php?t=402255 http://www.mar-k.com/tailgate_closure.html __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

Register or Log In To remove these advertisements.