1984 k10 "Black Bomber"

[thebluemax]

or as is should be called "frankentruck"

Truck was a factory 305,700R4,3.08,NP208. Power everything with sliding rear window.

Here is it from the beginning


With the rest of the former fleet....83 GMC 1/2 ton,78 Big Ten, and 98 Tahoe 4x4


Every one has to have at least one stupid stuck, the ones that you just should have know better




Playing in the mud

[thebluemax]

2 1/2 inch lift and 33x12.50 mudkings


sat behind my parents garage for a few years wasting away and waiting...


For me to get in the game again.....6 inch lift


My dad and I put a vinyl seat cover on


Converted the doors to manual windows/locks


Put in an older grant wheel ...a side note on this wheel is my dad installed it on his first car in '66


Installed an XJ steering shaft



Made some "custom" door locks

[thebluemax]

Got a 350 out of an 87 V30


which turned out to be 350 out of 70 camaro with 87 heads

Picked up a toolbox off craigslist




Bolted on a new front driveshaft


Installed 350


Shot of truck after motor install


Pulled this Edelbrock off to rebuild it with new gaskets and offroad needle/seat

[thebluemax]

Currently working on swapping the front axle to 3/4 ton using 8 lug outers and grinding calipers to fit 15 inch rims....

I also have a 14 bolt rear out of 78 k30 that needs the spring perches and shock mounts moved.

[thebluemax]

Installed my bumper


Put a dash in


Windshield in the works


Pics of the start of 8 lug outers, don't have any completed ones yet




My "jig" for removing the bleeder screw from the calipers to replace it

[grayharville]

updates? i like it

[thirdstreettito]

Subscribed.