FL 1967 Speedwarning dash for sale

[Bpokey]

Nice, original speedwarning with gauges - original knob and mechanism turns freely. All needles are straight and lettering looks good. Comes with original wiring and buzzer. (I was unable to get the buzzer to work by itself, but the dash itself is in working condition).

$325 shipped in CONUS

[Bpokey]

New lower price.

[PICKMUP]

I can fix that buzzer by converting it to electronic and everything fits inside the original housing and uses the original hookups so the stock harness plugs right in. That may help the sale if buyers know we can make that work.

[Bpokey]

Thanks for the information. I opened this buzzer up to see if I could see anything wrong, everything looked good but I am no electrician. I hooked it to the fuse block in my 68 and grounded the signal wire. There is a third prong on the buzzer with no wire from the plug. Am I missing something?

[PICKMUP]

Originally Posted by Bpokey

Thanks for the information. I opened this buzzer up to see if I could see anything wrong, everything looked good but I am no electrician. I hooked it to the fuse block in my 68 and grounded the signal wire. There is a third prong on the buzzer with no wire from the plug. Am I missing something?

Sounds right. It is just "dead", like most of the old used ones.

[Bpokey]

Open to reasonable offers.

[too much stuff]

Looking for any parts trades?

[PT'S 70 CST]

What is the deal with the speedo needle it is off a good bit. Have you tried spinning the bac to make sure it moves. Have you opened it up to look at it?


Thanks PT

[Bpokey]

Originally Posted by too much stuff

Looking for any parts trades?

I would rather have the money. The parts I need are ones I will probably have to save up for. I need a tailgate, decent cab, some sort of posi unit.

[Bpokey]

Originally Posted by PT'S 70 CST

What is the deal with the speedo needle it is off a good bit. Have you tried spinning the bac to make sure it moves. Have you opened it up to look at it?


Thanks PT

The speedo needle moves normally when I turn the input on the back. I guess I never looked at where the needle position was. I only opened it up to gently clean the dust off the lens and gauges.

[Bpokey]

ttt

[Bpokey]

New Price 325 shipped. Looks like this might have to find it's way onto my truck!

[Bpokey]

ttt, open to offers.

[71 super]

You do 275 on it? let me know. Harold

[Bpokey]

I have someone else at $275 via private message but I think he thought the buzzer worked. I am waiting to find out if he still wants it at $275. I will let you know if it is still available.

[70LonghornCST]

Originally Posted by Bpokey

I have someone else at $275 via private message but I think he thought the buzzer worked. I am waiting to find out if he still wants it at $275. I will let you know if it is still available.

I know that this is something that many users are unaware of, but you might want to revisit the Sellers Code of Conduct Page.

III.All sales must be posted in thread, a reply stating who is in line is also suggested. Accepting sales via Private Messages will result in confusion within the thread and is strictly prohibited.

Alot of buyers don't know this either, since many are non-registered users, who never delve deep into the forum guidlines or info pages. It just helps to clear any confusion and keep a track record for MODS in case anything goes wrong with a sale.

BTW, that is a NICE cluster you have there! I have thought about buying it several times for your original price. It is a GREAT Deal

Good luck with your sale.
-Richard

[Bpokey]

Sorry everyone for the confusion. That rule makes sense, I just never thought of it. 71 super, you are first in line at $275 shipped.

[71 super]

I will take it. Let me know your paypal. Thanks Harold

[Bpokey]

sent you a PM.

[71 super]

sent you paypal thank you, Harold

[Bpokey]

sold