|
My truck is going to be a Phantom dually which means I am using a stock dually bed and putting a set of 33x 19.5 MT's under it. It uses the stock axle size. I am going to hopefully be laying rocker and will be bagged with a 4 link rear and notched front crossmember. I have a SBC 406 that puts out 450 hp without aluminum heads. Once I switch the heads I should get over 500!! But it is not blown!! That would be cool.
__________________
92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448
|
09-07-2003, 10:09 PM
Threaded Mode