Gas filler neck

[concretekiller]

I just did this, it was a royal PITA. If you don't have skinny hands, it will be even worse. First thing I did was disassembly of course. Next I undid the straps, tilted the tank up, and pulled it toward the passenger side to get it out of the way. Next, installed body grommet. Installed metal filler, and hammered into place with large rubber hammer. Then installed rubber filler neck and upper band clamp. Then I lifted and tilted the tank again, but pushed toward driver side to slide it into rubber filler neck. Then installed lower band clamp, and then tank straps. Like I said, if you don't have small skinny hands, best of luck to you.
Posted via Mobile Device