rear fender tire clearance 49

[jackson]

for those of you who went pretty low. what did you do with the inner fender brace. running 275/60 top of wheel opening is at top of wheel

[youngrodder]

I kept mine, but I cut relief slits in them and pounded them flat against to top of the fender so that they would not internfer. I also drilled out the rivet and welded them smooth.

Obviously I did this prior to paint.

I am running 20's now, but I mocked up with 275/60 15 set up with air ride and they cleared.

Marc

[Laid_Out_50]

What did you do to the front braces to fit the larger wheels?
Posted via Mobile Device

[jackson]

Originally Posted by youngrodder

I kept mine, but I cut relief slits in them and pounded them flat against to top of the fender so that they would not internfer. I also drilled out the rivet and welded them smooth.

Obviously I did this prior to paint.

I am running 20's now, but I mocked up with 275/60 15 set up with air ride and they cleared.

Marc

mine wont be that low

[youngrodder]

Originally Posted by Laid_Out_50

What did you do to the front braces to fit the larger wheels?
Posted via Mobile Device

Got rid of them. I'm not running the stock braces in the front. I made some other ones to offer support.

Marc

[youngrodder]

Originally Posted by jackson

mine wont be that low

Yeah this is aired out. This is not my drive height.

Marc

[cajundragger]

I don't run the rear brace. I notched and reinforced the front braces.