PTO winch entire set-up for sale! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

82sub · 09-25-2003, 10:57 PM

Yes you could make it completely mechanical but routing the pto shaft might be dificult. The leaking oil is not from the shaft seal but from the gasket that seals the end cap housing. It did not leak until i overfilled the winch after i removed the bumper. All it would need is to be resealed on that cap. I replaced the shaft seals last year when i got the winch. Any other questions feel free to email me too bjmentch@mtu.edu Thanks

This set up is now on e-bay!
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2434665351

09-25-2003, 10:57 PM	#1
82sub Registered User Join Date: Sep 2003 Posts: 8	Yes you could make it completely mechanical but routing the pto shaft might be dificult. The leaking oil is not from the shaft seal but from the gasket that seals the end cap housing. It did not leak until i overfilled the winch after i removed the bumper. All it would need is to be resealed on that cap. I replaced the shaft seals last year when i got the winch. Any other questions feel free to email me too bjmentch@mtu.edu Thanks This set up is now on e-bay! http://cgi.ebay.com/ebaymotors/ws/eB...tem=2434665351 __________________ Brian 82 Sub-Blaze-Up SM465/NP205, D60, 14FF, 40" TSL's Pictures Club Page Last edited by 82sub; 09-26-2003 at 06:43 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.