reverse manual valve body

[mightymouse]

does anyone on here run reverse valve body on the steering column? i have a b+m pro stick and a bench seat and the shifter is way to low. i started to make a console but it looks crapy.. any ideals

[redsled87]

I would try and make a riser for your shifter. I ran a standard pattern valve body on the column for several years and it was kind of a pain. The ratchet style shifter is much better way to go imo. You don't have to worry about going into the next gear. You could always get a B&M Mega Shifter for trucks with a higher base. That's what I have and it works good.

[mightymouse]

thanks for the info redsled87, ill check out the mega shifter, i'm thinking of trying to fab a mount off the seat frame but that would bring the cable way up off the floor . dang if you do,dang if you don't

[dbmx66]

mine sat too low as well so i made this fully adjustable platform for the shifter to get it up higher. you might be able to do something similar. mine has a tci manual forward valve body.

[limitedstreetoutlaw]

I also made a riser to get the shifter to were i was comfortable .



Thats a wild looking riser dbmx66.

[mightymouse]

thanks for the pictures guys , those are nice, im going to scrap what ive been working on today and make one similiar to yalls. heres a pic of what i wasted my time on

[djracer]

I want to put a cage in my son's truck and build a shifter mount off the dash bar. I have seen a sexy one on here that someone built.

[hotrod 80]

This is one that was in my Foxbody . Just to give an idea .