The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1947 - 1959 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-02-2012, 10:50 PM   #1
jmsaunders
Registered User
 
jmsaunders's Avatar
 
Join Date: Nov 2011
Location: Lebanon, TN
Posts: 311
Yes it made me cry

Saturday I decided to do the salvage yard crawl (I recycle parts as I have to do my build on a budget). Happen to see this truck sitting right up front. No they won't sell the whole vehicle. Yes it will get crushed. The seller couldn't have gotten more than $300.00 for it. Well the good thing is that I can use the rear bumper brackets. Plan to go back and get those in a few days.
Attached Images
 
jmsaunders is offline   Reply With Quote
Old 07-03-2012, 12:55 AM   #2
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Yes it made me cry

I still do not understand why we keep getting these posts and the dealers will not sell it for more than the crushed value or what they think the parts are worth. It's in the open, back up a wrecker and tow it away. Sounds like a ploy to jack up the price.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 07-03-2012, 01:08 AM   #3
c6_rob
Registered User
 
c6_rob's Avatar
 
Join Date: Nov 2011
Location: Redondo Beach, CA
Posts: 129
Re: Yes it made me cry

Man, from here looks like those doors alone are worth 300.

Sucks
__________________
52 Chevy 3100
c6_rob is offline   Reply With Quote
Old 07-03-2012, 08:01 AM   #4
98layinframe
Registered User
 
98layinframe's Avatar
 
Join Date: Oct 2011
Location: Pittsburgh Pa
Posts: 267
Re: Yes it made me cry

They wont sell the body one day and the the frame the next as "parts" probably no title hense why they wont sell it.
Posted via Mobile Device
__________________
91 s10 - bagged bodydropped 4", 350/700R4, narrowed reared, cantilever rear air bag setup
1951 chevy 3100 - in build/acquiring parts process. Have full C4 Corvette suspension front and rear, tpi 350, 700r4, 18" torque thrust II wheels
98layinframe is offline   Reply With Quote
Old 07-03-2012, 08:44 AM   #5
focusedontheprize
Registered User
 
focusedontheprize's Avatar
 
Join Date: Feb 2012
Location: CA
Posts: 846
Re: Yes it made me cry

Did they give you a price on the metal (doors and fenders) and the grille and bumper?
focusedontheprize is offline   Reply With Quote
Old 07-03-2012, 09:06 AM   #6
Billett
Registered User
 
Billett's Avatar
 
Join Date: Jun 2012
Location: Pittsgrove, NJ
Posts: 1,502
Re: Yes it made me cry

keep going back and grab it piece by piece
Billett is offline   Reply With Quote
Old 07-03-2012, 09:40 AM   #7
focusedontheprize
Registered User
 
focusedontheprize's Avatar
 
Join Date: Feb 2012
Location: CA
Posts: 846
Re: Yes it made me cry

Quote:
Originally Posted by Billett View Post
keep going back and grab it piece by piece
That is why I was asking, I would do that.

How does cutting up the cab work in the yard? Can you cut it up and take it?
focusedontheprize is offline   Reply With Quote
Old 07-03-2012, 01:10 PM   #8
jmsaunders
Registered User
 
jmsaunders's Avatar
 
Join Date: Nov 2011
Location: Lebanon, TN
Posts: 311
Re: Yes it made me cry

Quote:
Originally Posted by c6_rob View Post
Man, from here looks like those doors alone are worth 300.

Sucks
They're not in bad shape and I did think about getting them so that I can get rid of my vent window.

Quote:
Originally Posted by focusedontheprize View Post
Did they give you a price on the metal (doors and fenders) and the grille and bumper?
I didn't ask them about this one but on other vehicles (yes they have had more than one like this in the last 2 years that I've been going there). Most parts were 50-75 dollars.

Although I have thought about pulling the cab off the frame and getting the fenders, doors and frame. Last time I talked to them they'd do that for a little over what they can sell it for (about $12 - $15 per 100 pounds). They can't sell the cab though because they don't have a title.
jmsaunders is offline   Reply With Quote
Old 07-03-2012, 02:10 PM   #9
OrrieG
Registered User
 
OrrieG's Avatar
 
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
Re: Yes it made me cry

Is that a State law (title issue)? I have bought vehicles and motorcycles from dealers and repair shops with only a bill or sale that disclosed it was for parts only and did not come with a title. More legwork for the buyer but not illegal unless they are worried about the legality of the original transaction.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread
1964 Chevelle Malibu w/ 355-350TH (daily driver)
Helpful AD and TF Manual Site Old Car Manual Project
OrrieG is offline   Reply With Quote
Old 07-03-2012, 02:24 PM   #10
Billett
Registered User
 
Billett's Avatar
 
Join Date: Jun 2012
Location: Pittsgrove, NJ
Posts: 1,502
Re: Yes it made me cry

I was thinking the same. My dad bought a 1980 enduro without a title. It was a pain in the ass to get it on the road, but the p.o. didn't have to do anything with it.
Billett is offline   Reply With Quote
Old 07-03-2012, 02:39 PM   #11
Jesse49chevy
Registered User
 
Jesse49chevy's Avatar
 
Join Date: May 2012
Location: Houston
Posts: 462
Re: Yes it made me cry

on your next visit, check to see if it has a vin#, remove the vin# placard and sell it to me, i need it for mine.
__________________
Semper Fi


Check out my project:
http://67-72chevytrucks.com/vboard/s...d.php?t=559086
Jesse49chevy is offline   Reply With Quote
Old 07-03-2012, 04:22 PM   #12
Stephanie
Registered User
 
Stephanie's Avatar
 
Join Date: Jun 2012
Location: St. Robert, MO
Posts: 160
Re: Yes it made me cry

Hey jmsaunders, it says that you live in Lebanon, is that Lebanon, Missouri? Is that where this salvage yard is located?? I would love any info on it since we live in St. Robert and are looking to go to a few salvage yards in next couple weeks. Thank you
__________________
Boys aren't the only ones that like to get their hands dirty! \m/(@o@)\m/

1950 Army Chevy 3100 build: The Chester Chronicles

Proud Army Wife!
Stephanie is offline   Reply With Quote
Old 07-03-2012, 06:54 PM   #13
jmsaunders
Registered User
 
jmsaunders's Avatar
 
Join Date: Nov 2011
Location: Lebanon, TN
Posts: 311
Re: Yes it made me cry

Quote:
Originally Posted by Jesse49chevy View Post
on your next visit, check to see if it has a vin#, remove the vin# placard and sell it to me, i need it for mine.
I would be more than happy to do that for you. Are you talking about the one on the pillar where the door closes?

Quote:
Originally Posted by Stephanie View Post
Hey jmsaunders, it says that you live in Lebanon, is that Lebanon, Missouri? Is that where this salvage yard is located?? I would love any info on it since we live in St. Robert and are looking to go to a few salvage yards in next couple weeks. Thank you
No I'm in Lebanon, TN about 30 minutes east of Nashville
jmsaunders is offline   Reply With Quote
Old 07-04-2012, 12:16 AM   #14
Jesse49chevy
Registered User
 
Jesse49chevy's Avatar
 
Join Date: May 2012
Location: Houston
Posts: 462
Re: Yes it made me cry

Yes, I need the vin# to be legible. Feel free to call me. 281-794-7057
Posted via Mobile Device
__________________
Semper Fi


Check out my project:
http://67-72chevytrucks.com/vboard/s...d.php?t=559086
Jesse49chevy is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 08:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com