|
08-03-2012, 01:18 PM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: roswell georgia
Posts: 164
|
radiator question
I was in a hurry when replacing my '66 Suburban radiator... did not look carefully. Wonder if the u-shaped holding brackets underneath the radiator have bolt attachments to the rail that supports them ??
I used a full-size Pontiac radiator in place of the original radiator for a 305V6. It's a fine fit... almost ! The driver's side u-bracket is soooooo close to the new lower water outlet that the hose clamp has trouble sliding over the hose. If I could move that bracket juuusssst a bit closer towards the middle... it would be beautiful. Opinions and input, please. Thanks- |
|
|
|
08-03-2012, 01:25 PM
|
#2 |
|
It's Better With Nitro
Join Date: Apr 2008
Location: Chino Hills, CA
Posts: 2,262
|
Re: radiator question
Yes, I have moved the lower radiator saddles depending on the radiator application (e.g., to clear transmission cooler ports, etc.). I've drilled the new location on the lower mount and used a regular nut a bolt under the rubber bushing in the past to reposition the saddle(s).
__________________
1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes |
|
|
|
|
08-03-2012, 01:31 PM
|
#3 |
|
Registered User
Join Date: Nov 2010
Location: roswell georgia
Posts: 164
|
Re: radiator question
Sounds easy enough... (famous last words).
Thanks, vin |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
