Seat belts? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BtnkBndt · 10-11-2003, 01:47 PM

Anyone tell me if there are any later model belts that will work in my 67?

I'm thinking early 80's center front and rear lap belts out of maybe an Impala, Caddillac etc (with the GM button latches)?. I have the originals but would like to have the plastic support cover on the sides so they don't do the door hang thing, also want three belts. Want to salvage yard something.

Thanks for any suggestions before I go scavaging.

**68 Stepside** · 10-11-2003, 02:39 PM

If you'd like to go with shoulder belts, a few people on this site have used belts out of S-10's. Bill72BB is one member that comes to mind. I believe Palf70Step might also have them. I'll bring this to the top, maybe one of them will see the post, and can lead you in the right direction.

Good luck.

BtnkBndt · 10-11-2003, 03:18 PM

Hey thanks,

Earlier I did a search on seat belts and did'nt get much. Just searched s-10 belts and got this:

http://67-72chevytrucks.com/vboard/s...ight=s10+belts

I'm off to the yards to see what I can come up with.

BtnkBndt · 10-11-2003, 07:13 PM

Well, just got back and could'nt find much in the trucks I saw. Pretty much stripped or wrong color. Found these in the back seat of a Caddy, 80'ish model.

BtnkBndt · 10-11-2003, 07:21 PM

I know they are a bit short but hey they were only 15 bucks for the set. I'll take the the buckle sides to a local upolstery shop and have longer belts put on them. I really like the retractables for the door side.

*Phillip Johnson* · 10-11-2003, 08:51 PM

You may have an issue with the local law boys as back in the "drag racing" days, we had to have our belts checked and certified quite often and it IS checked. I tried to get a upholstry guy to make me up a new set and he refused as to the liability. If it breaks, its his butt on the line. Kinda like the Ford-Firestone tire fiasco.. Good luck.. I would suggest the S-10 route. Then you at least have a set of stock Factory belts..

Bill72BB · 10-12-2003, 11:39 AM

Here are the S10 belts installed

Bill72BB · 10-12-2003, 11:41 AM

Here they are with the later model seat

SWEET7T · 10-12-2003, 05:57 PM

Bill...
what year approx are theose seatbelts from?! I ran to the junkyard looking for some, but everything I found was too new.

RON WOODGEARD · 10-12-2003, 07:22 PM

Check out this page, Mine are on the way. the whole set.

http://www.****************.com/boar...dspecials.html

10-11-2003, 01:47 PM	#1
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	Seat belts? Anyone tell me if there are any later model belts that will work in my 67? I'm thinking early 80's center front and rear lap belts out of maybe an Impala, Caddillac etc (with the GM button latches)?. I have the originals but would like to have the plastic support cover on the sides so they don't do the door hang thing, also want three belts. Want to salvage yard something. Thanks for any suggestions before I go scavaging.

10-11-2003, 02:39 PM	#2
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	If you'd like to go with shoulder belts, a few people on this site have used belts out of S-10's. Bill72BB is one member that comes to mind. I believe Palf70Step might also have them. I'll bring this to the top, maybe one of them will see the post, and can lead you in the right direction. Good luck. __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay

10-11-2003, 07:13 PM	#4
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	Well, just got back and could'nt find much in the trucks I saw. Pretty much stripped or wrong color. Found these in the back seat of a Caddy, 80'ish model. Attached Images

10-11-2003, 07:21 PM	#5
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	I know they are a bit short but hey they were only 15 bucks for the set. I'll take the the buckle sides to a local upolstery shop and have longer belts put on them. I really like the retractables for the door side. Attached Images

10-12-2003, 11:39 AM	#7
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Here are the S10 belts installed Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

10-11-2003, 03:18 PM	#3
BtnkBndt Pennyless Fool Join Date: Oct 2003 Location: Forney,Tx Posts: 439	Hey thanks, Earlier I did a search on seat belts and did'nt get much. Just searched s-10 belts and got this: http://67-72chevytrucks.com/vboard/s...ight=s10+belts I'm off to the yards to see what I can come up with.

10-11-2003, 08:51 PM	#6
Phillip Johnson Account Suspended Join Date: Apr 2000 Location: Grants Pass, Oregon Posts: 1,579	You may have an issue with the local law boys as back in the "drag racing" days, we had to have our belts checked and certified quite often and it IS checked. I tried to get a upholstry guy to make me up a new set and he refused as to the liability. If it breaks, its his butt on the line. Kinda like the Ford-Firestone tire fiasco.. Good luck.. I would suggest the S-10 route. Then you at least have a set of stock Factory belts..

10-12-2003, 11:41 AM	#8
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	Here they are with the later model seat Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen ,

10-12-2003, 05:57 PM	#9
SWEET7T Try spinnin 4 rear tars Join Date: Sep 2003 Location: Salt Lake City, Utah Posts: 757	Bill... what year approx are theose seatbelts from?! I ran to the junkyard looking for some, but everything I found was too new. __________________ SWEET7T 1970 C10, 2wd, LB, 307/TH350/3.08. PS, PB

10-12-2003, 07:22 PM	#10
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	Check out this page, Mine are on the way. the whole set. http://www.****************.com/boar...dspecials.html



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.