Mounting Points - Factory Mirrors & Badges - The 1947 - Present Chevrolet & GMC Truck Message Board Network

blazerslave · 10-03-2003, 12:22 AM

My '72 Blazer is at the painter and I am going to have him mount factory mirrors (the small ones) and the "CST" badges on the door. I want to be certain that he puts them in the door in the correct factory positions.

Can any of you tell me exactly where the mounting points are on the doors?

I looks like the edge of the mirror is just past the wind wing and that the "CST" is centered.

Help!

Mike-

1970blazin · 10-03-2003, 01:05 AM

I am interest to know this also. I need to put my CST emblem on my doors. I have old doors that have the emblems on them, but I just am not to sure everything was original when I bought it. I can measure tomorrow and maybe someone can verify it.

HatGuy · 10-03-2003, 01:32 AM

Ill take a pic and post it in the morning, if you like.

*Gee_Emm* · 10-03-2003, 09:27 AM

1

*Gee_Emm* · 10-03-2003, 09:28 AM

2

BobbyK · 10-04-2003, 12:54 AM

That factory assembly manual is great.But it leaves out some important measurements.
A measurement from the front of the door edge to the first hole would be VERY helpfull.You could then referance all the other measurements from there.

Dan69 step · 10-04-2003, 07:57 AM

I do know that the passenger side mirror sets slightly more rearward than the drivers side. Realized this when placing mine and looking at some completely original trucks.

blazerslave · 10-04-2003, 03:46 PM

If anyone can get the measurements from the door edge, that's be great. It'll be very helpful.

Radiatta_71 · 10-07-2003, 03:05 PM

anyone have these measurements? This sure would be helpful for me too.

blazerslave · 10-12-2003, 06:18 PM

If anyone could find the time to take some measurements I think a lot of us would benefit from it!

I know I would really appreciate it!!!!

THANKS!

Patch · 10-12-2003, 06:22 PM

Well...mine measures 13 1/4 from the aft door edge.....but that is to the edge of the emblem...not the holes.....passenger side measures the same....Hope that helps....

blazerslave · 10-13-2003, 03:06 AM

Thanks Patch!

Any idea about the (small) factory mirrors? Is it true . . . are the driver and passenger mirrors mounted at different points on the door?

Mike-

BobbyK · 10-13-2003, 03:16 AM

It is true.
The drivers mirror is about 6" from the front door edge while the passenger mirror is about 8" from the door edge..
There was a post awhile back with exact measurements,I'll see if I can find it.

blazerslave · 10-13-2003, 03:21 AM

Thanks!!!! What a pal!!!!

Mike-

BobbyK · 10-13-2003, 03:24 AM

I found it.It's the very last reply in the link.
http://67-72chevytrucks.com/vboard/s...hlight=mirrors

It says:
"The drivers side is 6 7/16" from the front of the door to the center of the front hole. Then 3 1/2" from the top of the door to the center of the front hole. The top of the top rear hole is 2 7/8" from the top of the door. The passenger side mirror is 8 1/4" from the center of the front hole to the front of the door. The top of the door to the center of both front and rear holes are the same as the drivers side."

I'll be installing my passenger side mirror this week.:p

blazerslave · 10-13-2003, 03:28 AM

BobbyK . . . you da man!

Thanks for your help!

Mike-

*Gee_Emm* · 10-13-2003, 10:46 AM

I wonder how many people go and put on the mirrors the same spot on both doors :p

10-03-2003, 12:22 AM	#1
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	Mounting Points - Factory Mirrors & Badges My '72 Blazer is at the painter and I am going to have him mount factory mirrors (the small ones) and the "CST" badges on the door. I want to be certain that he puts them in the door in the correct factory positions. Can any of you tell me exactly where the mounting points are on the doors? I looks like the edge of the mirror is just past the wind wing and that the "CST" is centered. Help! Mike-

10-03-2003, 01:05 AM	#2
1970blazin Blazerless:-( Join Date: Jun 2003 Location: Olympia WA Posts: 1,612	I am interest to know this also. I need to put my CST emblem on my doors. I have old doors that have the emblems on them, but I just am not to sure everything was original when I bought it. I can measure tomorrow and maybe someone can verify it. __________________ 1970blazin 1970 CST Blazer-Orig. Dark Blue-SOLD Progress Pics of Blazer for sale

10-03-2003, 01:32 AM	#3
HatGuy Registered User Join Date: Aug 2003 Location: Fort Worth Texas Posts: 275	Ill take a pic and post it in the morning, if you like. Attached Images __________________ Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html

10-04-2003, 12:54 AM	#6
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	That factory assembly manual is great.But it leaves out some important measurements. A measurement from the front of the door edge to the first hole would be VERY helpfull.You could then referance all the other measurements from there. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

10-04-2003, 07:57 AM	#7
Dan69 step Registered User Join Date: Nov 2000 Location: Fullerton,NE Posts: 380	I do know that the passenger side mirror sets slightly more rearward than the drivers side. Realized this when placing mine and looking at some completely original trucks. __________________ 69 short step 68 50th Anniversary Gold/ White lwb 72 2wd Blazer 63 Studebaker Avanti 85 Avanti 66 Studebaker Cruiser 49 Studebaker pickup 3-49 Studebaker 1 1/2 truck 94 White/ GMC coe (cabin hauler) 95 chev 2015 chev Duramax 2500

10-03-2003, 09:27 AM	#4
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	1

10-03-2003, 09:28 AM	#5
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	2

10-04-2003, 03:46 PM	#8
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	If anyone can get the measurements from the door edge, that's be great. It'll be very helpful. __________________ "If you choose not to decide . . . you still have made a choice."

10-07-2003, 03:05 PM	#9
Radiatta_71 Registered User Join Date: Jul 2002 Location: Vancouver, WA Posts: 117	anyone have these measurements? This sure would be helpful for me too.

10-12-2003, 06:18 PM	#10
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	If anyone could find the time to take some measurements I think a lot of us would benefit from it! I know I would really appreciate it!!!! THANKS! __________________ "If you choose not to decide . . . you still have made a choice."

10-12-2003, 06:22 PM	#11
Patch Senior Member Join Date: Jul 2002 Location: Oak Harbor, WA Posts: 709	Measurement Well...mine measures 13 1/4 from the aft door edge.....but that is to the edge of the emblem...not the holes.....passenger side measures the same....Hope that helps.... __________________ Patch

10-13-2003, 03:06 AM	#12
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	Thanks Patch! Any idea about the (small) factory mirrors? Is it true . . . are the driver and passenger mirrors mounted at different points on the door? Mike- __________________ "If you choose not to decide . . . you still have made a choice."

10-13-2003, 03:16 AM	#13
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	It is true. The drivers mirror is about 6" from the front door edge while the passenger mirror is about 8" from the door edge.. There was a post awhile back with exact measurements,I'll see if I can find it. __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE

10-13-2003, 03:21 AM	#14
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	Thanks!!!! What a pal!!!! Mike- __________________ "If you choose not to decide . . . you still have made a choice."

10-13-2003, 03:24 AM	#15
BobbyK Registered User Join Date: May 2000 Location: Petrolia,Ontario,Canada but working in Port Huron,Mi. Posts: 1,772	I found it.It's the very last reply in the link. http://67-72chevytrucks.com/vboard/s...hlight=mirrors It says: "The drivers side is 6 7/16" from the front of the door to the center of the front hole. Then 3 1/2" from the top of the door to the center of the front hole. The top of the top rear hole is 2 7/8" from the top of the door. The passenger side mirror is 8 1/4" from the center of the front hole to the front of the door. The top of the door to the center of both front and rear holes are the same as the drivers side." I'll be installing my passenger side mirror this week.:p __________________ 71 blazer,350SBC,approx.375HP,700R4,factory GM TPI.Dual electric fans,33x12.5x15 ATR on stock suspension. Petrolia,Ontario,Canada but working in Port Huron,MI. See ALL my Blazer pic's HERE



Register or Log In To remove these advertisements.

10-13-2003, 03:28 AM	#16
blazerslave Registered User Join Date: Nov 2000 Location: Valencia, CA Posts: 96	BobbyK . . . you da man! Thanks for your help! Mike- __________________ "If you choose not to decide . . . you still have made a choice."

10-13-2003, 10:46 AM	#17
Gee_Emm Account Suspended Join Date: Sep 2000 Posts: 3,991	I wonder how many people go and put on the mirrors the same spot on both doors :p

Register or Log In To remove these advertisements.