Needed 5.3-4.8 engine harness DBW - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Indian113 · 09-21-2012, 12:58 PM

I need a 99-2001 DBC engine harness mines so messed up It's useless! Anybody have their not using? If so what do ya need for it shipped? Thanks Ray I made a mistake in my Discription It's a Drive by Cable

Critter · 09-21-2012, 09:46 PM

Are you looking for an untouched stock harness or one that's ready to go?

Indian113 · 09-21-2012, 10:33 PM

Right now I can go either way. We can take out what we don't need out of a stock one,it will take about 3-4 hours to make a stock one work. Thanks Ray

C10_ustacould · 09-22-2012, 10:30 AM

I have a complete factory set up with a computer, it belongs to member Havinsomefun. I will post it for sale with pics to satisfy board rules.

Indian113 · 09-22-2012, 10:47 AM

Thanks,where are you going to post?

C10_ustacould · 09-22-2012, 10:59 AM

Whoops just saw your correction I have a harness only for a 5.3 listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=539671

C10_ustacould · 09-22-2012, 11:00 AM

I will post the DBW stuff here in the LSx Swap thread...

Indian113 · 09-22-2012, 11:08 AM

I'm sorry BuckSS I titled my thread wrong! I need DBC harrness.

C10_ustacould · 09-22-2012, 11:13 AM

Quote:

Originally Posted by Indian113

I'm sorry BuckSS I titled my thread wrong! I need DBC harrness.

Yep, the harness in the link above is DBC.

Critter · 09-22-2012, 11:25 AM

I will look through my pile and see what I have. Or you could send me what you have and I could patch it (all soldered and heat shrunk connections). I have a dbc 5.3 on my engine dyno right now for mock up purposes. I could repair and run the harness on my test engine, then send it back to you.

Indian113 · 09-22-2012, 01:23 PM

Thanks for the offer Critter,I bought the harness BucksSS had worth the money. This Ls1 changeover is getting to be a pain in the XXX I will have buch of stuff to sell when I'm done.

Critter · 09-22-2012, 01:49 PM

Sounds good. Let me know what you have left, I like to keep spare connectors around if I need to patch something. I try to use all new when I build from scratch though.

Jdubs71 · 09-22-2012, 03:39 PM

I'm looking for a dbw set up for my 05 5.3 swap. My harness was hacked up when they pulled the motor.

C10_ustacould · 09-22-2012, 04:33 PM

Quote:

Originally Posted by Jdubs71

I'm looking for a dbw set up for my 05 5.3 swap. My harness was hacked up when they pulled the motor.

Check out the link: http://67-72chevytrucks.com/vboard/s...d.php?t=544120

09-21-2012, 12:58 PM	#1
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Needed 5.3-4.8 engine harness DBW I need a 99-2001 DBC engine harness mines so messed up It's useless! Anybody have their not using? If so what do ya need for it shipped? Thanks Ray I made a mistake in my Discription It's a Drive by Cable Last edited by Indian113; 09-21-2012 at 01:12 PM. Reason: Wrong Title words

09-21-2012, 09:46 PM	#2
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Needed 5.3-4.8 engine harness DBW Are you looking for an untouched stock harness or one that's ready to go? __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

09-21-2012, 10:33 PM	#3
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Needed 5.3-4.8 engine harness DBW Right now I can go either way. We can take out what we don't need out of a stock one,it will take about 3-4 hours to make a stock one work. Thanks Ray

09-22-2012, 10:30 AM	#4
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Needed 5.3-4.8 engine harness DBW I have a complete factory set up with a computer, it belongs to member Havinsomefun. I will post it for sale with pics to satisfy board rules. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

09-22-2012, 10:47 AM	#5
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Needed 5.3-4.8 engine harness DBW Thanks,where are you going to post?

09-22-2012, 10:59 AM	#6
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Needed 5.3-4.8 engine harness DBW Whoops just saw your correction I have a harness only for a 5.3 listed here: http://67-72chevytrucks.com/vboard/s...d.php?t=539671 __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

09-22-2012, 11:00 AM	#7
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Needed 5.3-4.8 engine harness DBW I will post the DBW stuff here in the LSx Swap thread... __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

09-22-2012, 11:08 AM	#8
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Needed 5.3-4.8 engine harness DBW I'm sorry BuckSS I titled my thread wrong! I need DBC harrness.

09-22-2012, 11:25 AM	#10
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Needed 5.3-4.8 engine harness DBW I will look through my pile and see what I have. Or you could send me what you have and I could patch it (all soldered and heat shrunk connections). I have a dbc 5.3 on my engine dyno right now for mock up purposes. I could repair and run the harness on my test engine, then send it back to you. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

09-22-2012, 01:23 PM	#11
Indian113 Registered User Join Date: Sep 2009 Location: Monroe,Iowa Posts: 4,370	Re: Needed 5.3-4.8 engine harness DBW Thanks for the offer Critter,I bought the harness BucksSS had worth the money. This Ls1 changeover is getting to be a pain in the XXX I will have buch of stuff to sell when I'm done. Last edited by Indian113; 09-22-2012 at 01:24 PM. Reason: fat fingers

09-22-2012, 01:49 PM	#12
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Needed 5.3-4.8 engine harness DBW Sounds good. Let me know what you have left, I like to keep spare connectors around if I need to patch something. I try to use all new when I build from scratch though. __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

09-22-2012, 03:39 PM	#13
Jdubs71 Registered User Join Date: May 2012 Location: Sanger, CA Posts: 415	Re: Needed 5.3-4.8 engine harness DBW I'm looking for a dbw set up for my 05 5.3 swap. My harness was hacked up when they pulled the motor.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.