The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 11-03-2012, 12:54 PM   #1
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
stock springs vs lift spring capacity

Hey guys does anyone know if the lift springs from like tuff country are rated for the same capacity as the stock springs that came on our trucks. This is for a 3/4 ton mine for example is an 8400gvw but I out tuff country 2" springs on the truck? If I was to put a camper on will it have the same capacity as the stock ones did? I was almost wanting to go to the junkyard and get the big 8 leaf pack on the 3/4 tons and put that out back if not.
75chev4x4 is offline   Reply With Quote
Old 11-03-2012, 03:33 PM   #2
Rubble
Registered User
 
Join Date: Feb 2012
Location: Big Valley. Alberta
Posts: 674
Re: stock springs vs lift spring capacity

I am not sure what make they are,cause they were on the truck when I bought it.But my 86 has 4" spring lift on rear and yes it's load capacity is less than my 82 that has stock 3/4 ton springs with blocks.The spring lift does ride a bit softer,but it does seem to wander a bit more than the 82 and they are both 3/4.The spring lift is even worse if you hook up the car hauler....
Posted via Mobile Device
__________________
1977 Chev C30 454/465/14ff DRW
1974 Chev C20.350/465/14ff

" Rock n Roll ain't noise pollution"
Rubble is offline   Reply With Quote
Old 11-03-2012, 04:10 PM   #3
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: stock springs vs lift spring capacity

Yea that's what I was afraid of, thanks.
75chev4x4 is offline   Reply With Quote
Old 11-03-2012, 04:10 PM   #4
88Jimmy4x4
Registered User
 
88Jimmy4x4's Avatar
 
Join Date: Oct 2003
Location: houston, texas
Posts: 1,974
Re: stock springs vs lift spring capacity

http://coloradok5.com/springratetable.shtml
__________________
2008 Silverado Z71 RCSB
1991 GMC Jimmy 4x4
1976 GMC Sierra C15 SWB
88Jimmy4x4 is offline   Reply With Quote
Old 11-05-2012, 03:56 PM   #5
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: stock springs vs lift spring capacity

Hey guys I'm reading all about the different 52 and 56" springs. My k20 is set il for the 52" in the rear and I'm getting rid of the lift springs and getting a set of stock springs at the junk yard. Would there be any benifit to going to the 56 in springs for my truck moving the hanger back?
75chev4x4 is offline   Reply With Quote
Old 11-05-2012, 08:58 PM   #6
75chev4x4
Registered User
 
75chev4x4's Avatar
 
Join Date: May 2012
Location: Estacada, Oregon
Posts: 254
Re: stock springs vs lift spring capacity

weird, just go home and checked and on my 75 k20 there are no extra bolt holes to move the rear shackle back to use the 56" springs. Unless they only did this on the half tons or not at all on the early trucks I dont see them on mine.
75chev4x4 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:58 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com