|
11-26-2012, 04:24 AM
|
#1 |
|
Registered User
Join Date: Nov 2010
Location: central point, oregon
Posts: 72
|
61 motor mount ???
i just swapped out the old front clip for a 1980 disc brake model. thanks to all for the thread made it all very easy. just wondering about the motor mounts because the frame rail on the 80 clip was alot taller and the old mounts don't line up. any suggestions.
|
|
|
|
11-26-2012, 09:46 AM
|
#2 |
|
Registered User
Join Date: Apr 2012
Location: L.ower A.labama
Posts: 518
|
Re: 61 motor mount ???
I've seen a few where people used a block of steel for a spacer between the upper rail and the newer motor mount.
Posted via Mobile Device |
|
|
|
|
11-27-2012, 12:09 AM
|
#3 |
|
60-66 Nut
  Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,252
|
Re: 61 motor mount ???
If you want to stay with the later style motor mounts, look for the frame brackets from a C20. They are shorter than the C10 brackets, but will still require a spacer on top of the frame. If you would rather stick with the older style pickup motor mounts, get a set of frame brackets for a '67-'72 with a small block. You shouldn't need a spacer with those.
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
