NM cpp 1" drop coil springs (front) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971gmcshortbed · 02-20-2010, 07:32 PM

So I found out i'm not low enough, i'm selling these coil springs to replace them with a 2 or 3" spring. These are cpp # FCS 6102-1 springs. They have been installed on a bare frame and have never been in service. $65 plus shipping. Shipping will be actual, give me your zip. Reply in thread, you will have a ups tracking # after payment. Thank you 6772.

49mercpapo · 02-20-2010, 07:48 PM

I have a set of CPP 3" coils. Would you be interested in trading.
Steven

1971gmcshortbed · 02-20-2010, 07:53 PM

Yessir Steven, trading is the best, do you have pics? We each pay shipping? Lets make a deal...

49mercpapo · 02-20-2010, 08:00 PM

They are still on my truck. I've only had them on there for 6 months. If it doesn't rain tomorrow I'll take them off and get you pictures.
Steven

1971gmcshortbed · 02-20-2010, 08:31 PM

Sounds good, are they on the truck in your avatar? Let me know, thanks,

HuggerCST · 02-20-2010, 10:09 PM

It looks like you have a deal made, but if it doesn't work out I'm interested also. I have a set of 2" drop springs to trade.

49mercpapo · 02-20-2010, 10:50 PM

Quote:

Originally Posted by 1971gmcshortbed

Sounds good, are they on the truck in your avatar? Let me know, thanks,

Yes, that's the truck there on.
Thanks,
Steven

1971gmcshortbed · 02-20-2010, 11:12 PM

Let me see what happens HuggerCST, 49mercpapo is that all you have on the front? In other words stock spindles?

49mercpapo · 02-20-2010, 11:15 PM

Quote:

Originally Posted by 1971gmcshortbed

Let me see what happens HuggerCST, 49mercpapo is that all you have on the front? In other words stock spindles?

Yes, I have the 3" coils with stock spindles nothing else.

1971gmcshortbed · 02-20-2010, 11:19 PM

Cool man, with my 3" spindles I should be where I want to be.

49mercpapo · 02-20-2010, 11:20 PM

Quote:

Originally Posted by 1971gmcshortbed

Cool man, with my 3" spindles I should be where I want to be.

Cool, if it doesn't rain I'll have them off tomorrow.
Thanks,
Steven

49mercpapo · 02-20-2010, 11:26 PM

Here's a couple more pictures.
3" coils in front 5" in back.

1971gmcshortbed · 02-21-2010, 11:04 AM

What tire size do you have Steven?

49mercpapo · 02-21-2010, 01:04 PM

235/75 15 in front.

1971gmcshortbed · 02-22-2010, 09:54 AM

Did you get them off 49mercpapo?

1971gmcshortbed · 02-22-2010, 12:01 PM

49mercpapo, I was measuring and I may be too low with 3" spring, have you taken them off? If not I may look for the 2" spring. Let me know, thank you.

49mercpapo · 02-22-2010, 01:24 PM

No not yet. I was going to start on them right now. But I'll wait to make sure you need them.
Steven

**72K20** · 02-22-2010, 01:27 PM

I'd like to get in line as a second or third alternate if any of the other previous deals fall through.

1971gmcshortbed · 02-22-2010, 01:46 PM

49merc, it will be too low. I apologize for not going through. My tires are as tall as yours and it will be too much. Huggercst is next, do you want to trade? Again Steven I do apologize.

HuggerCST · 02-22-2010, 01:54 PM

Yes I'll trade. Mine are ECE 2" drop springs that are a few years old but have zero miles on them. They have been blasted recently, so they are currently bare metal. I got them from a board member a few months ago and never installed them, so I just need to re box them. PM me if you want to trade and we can exchange addresses.

49mercpapo · 02-22-2010, 01:58 PM

Quote:

Originally Posted by 1971gmcshortbed

49merc, it will be too low. I apologize for not going through. My tires are as tall as yours and it will be too much. Huggercst is next, do you want to trade? Again Steven I do apologize.

It's cool, no worries.
Thanks for letting me know,
Steven

1971gmcshortbed · 02-22-2010, 03:13 PM

Huggercst if they are small block ece springs lets do it. I'll pm address and if you can give me yours. I will ship today from work if you give it to me soon. We each pay our own shipping?

1971gmcshortbed · 02-22-2010, 06:32 PM

Springs traded to Huggercst tracking # pm'ed tonight.

1971gmcshortbed · 02-27-2010, 08:05 PM

Springs are here Huggercst, thanks for the trade bud.

o5evoblue · 12-09-2012, 09:39 PM

I know this is a old post but I have a set of cpp 6102-1 coil springs. Looking to trade for something lower.

02-20-2010, 07:32 PM	#1
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	cpp 1" drop coil springs (front) So I found out i'm not low enough, i'm selling these coil springs to replace them with a 2 or 3" spring. These are cpp # FCS 6102-1 springs. They have been installed on a bare frame and have never been in service. $65 plus shipping. Shipping will be actual, give me your zip. Reply in thread, you will have a ups tracking # after payment. Thank you 6772. Attached Images __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-20-2010, 07:48 PM	#2
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: cpp 1" drop coil springs (front) I have a set of CPP 3" coils. Would you be interested in trading. Steven

02-20-2010, 07:53 PM	#3
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Yessir Steven, trading is the best, do you have pics? We each pay shipping? Lets make a deal... __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-20-2010, 08:00 PM	#4
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: cpp 1" drop coil springs (front) They are still on my truck. I've only had them on there for 6 months. If it doesn't rain tomorrow I'll take them off and get you pictures. Steven

02-20-2010, 08:31 PM	#5
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Sounds good, are they on the truck in your avatar? Let me know, thanks, __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-20-2010, 10:09 PM	#6
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: cpp 1" drop coil springs (front) It looks like you have a deal made, but if it doesn't work out I'm interested also. I have a set of 2" drop springs to trade. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-20-2010, 11:12 PM	#8
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Let me see what happens HuggerCST, 49mercpapo is that all you have on the front? In other words stock spindles? __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-20-2010, 11:19 PM	#10
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Cool man, with my 3" spindles I should be where I want to be. __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-20-2010, 11:26 PM	#12
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: cpp 1" drop coil springs (front) Here's a couple more pictures. 3" coils in front 5" in back. Last edited by 49mercpapo; 02-22-2010 at 03:31 PM. Reason: remove pictures

02-21-2010, 11:04 AM	#13
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) What tire size do you have Steven? __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-21-2010, 01:04 PM	#14
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: cpp 1" drop coil springs (front) 235/75 15 in front.

02-22-2010, 09:54 AM	#15
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Did you get them off 49mercpapo? __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-22-2010, 12:01 PM	#16
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) 49mercpapo, I was measuring and I may be too low with 3" spring, have you taken them off? If not I may look for the 2" spring. Let me know, thank you. __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-22-2010, 01:24 PM	#17
49mercpapo Registered User Join Date: Nov 2009 Location: La Habra, CA Posts: 198	Re: cpp 1" drop coil springs (front) No not yet. I was going to start on them right now. But I'll wait to make sure you need them. Steven

02-22-2010, 01:27 PM	#18
72K20 Slow Old Timer Join Date: Apr 2000 Location: Decatur, Texas USA Posts: 224	Re: cpp 1" drop coil springs (front) I'd like to get in line as a second or third alternate if any of the other previous deals fall through.



Register or Log In To remove these advertisements.

02-22-2010, 01:46 PM	#19
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) 49merc, it will be too low. I apologize for not going through. My tires are as tall as yours and it will be too much. Huggercst is next, do you want to trade? Again Steven I do apologize. __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-22-2010, 01:54 PM	#20
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Re: cpp 1" drop coil springs (front) Yes I'll trade. Mine are ECE 2" drop springs that are a few years old but have zero miles on them. They have been blasted recently, so they are currently bare metal. I got them from a board member a few months ago and never installed them, so I just need to re box them. PM me if you want to trade and we can exchange addresses. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

02-22-2010, 03:13 PM	#22
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Huggercst if they are small block ece springs lets do it. I'll pm address and if you can give me yours. I will ship today from work if you give it to me soon. We each pay our own shipping? __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-22-2010, 06:32 PM	#23
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Springs traded to Huggercst tracking # pm'ed tonight. __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

02-27-2010, 08:05 PM	#24
1971gmcshortbed Registered User Join Date: Jul 2003 Location: Las Cruces, NM Posts: 284	Re: cpp 1" drop coil springs (front) Springs are here Huggercst, thanks for the trade bud. __________________ My build, http://67-72chevytrucks.com/vboard/s...d.php?t=379006

12-09-2012, 09:39 PM	#25
o5evoblue Registered User Join Date: Aug 2012 Location: newman lake Posts: 1	Re: cpp 1" drop coil springs (front) I know this is a old post but I have a set of cpp 6102-1 coil springs. Looking to trade for something lower.

Register or Log In To remove these advertisements.