Need flanges for TBSS manifolds - The 1947 - Present Chevrolet & GMC Truck Message Board Network

JGross · 12-08-2012, 08:05 PM

Hello all

I picked up a set of TBSS exhaust manifolds for my 5.3 swap, now I need the flanges that bolt the exhaust pipes to the manifolds. Anyone know where I can get a set?

Thanks
Posted via Mobile Device

y5mgisi · 12-08-2012, 08:52 PM

Try Ebay maybe? Curious to see if anyone has a source for new ones!

MAK191 · 12-09-2012, 12:25 AM

I have the tbss manifolds and I just took the ones that were bolted to the stock lm7 maniflods and swapped them over. Of course this only works if you have them. If not they are probably cheap at a junk yard
Posted via Mobile Device

BR3W CITY · 12-09-2012, 04:47 PM

I wasn't able to find any at junkyards that weren't rusted to all hell. I traced them on cardboard and had some torch cut from 3/8 steel

JGross · 12-09-2012, 07:40 PM

Quote:

Originally Posted by BR3W CITY

I wasn't able to find any at junkyards that weren't rusted to all hell. I traced them on cardboard and had some torch cut from 3/8 steel

Thanks I think thats what I'll do
Posted via Mobile Device

BR3W CITY · 12-10-2012, 01:33 AM

No worries, the only thing I'll say is that if you are gonna use a hand-held torch or plasma, refrain from cutting the center holes freehand. It doesn't take much to make an ovaled hole thats hard to seal with a gasket, or go to small and hurt your flow. Mine were done on a torch table, but you can get away with a hole guide or a large enough mill or hole saw.

12-08-2012, 08:05 PM	#1
JGross Registered User Join Date: Apr 2010 Location: Hattiesburg Ms Posts: 235	Need flanges for TBSS manifolds Hello all I picked up a set of TBSS exhaust manifolds for my 5.3 swap, now I need the flanges that bolt the exhaust pipes to the manifolds. Anyone know where I can get a set? Thanks Posted via Mobile Device

12-08-2012, 08:52 PM	#2
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Need flanges for TBSS manifolds Try Ebay maybe? Curious to see if anyone has a source for new ones! __________________ 90 Chevy Suburban 2500 5.3 swap/th400/np241/14bltSF/10blt. 77 C20 crew cab Silverado. 396/th400. In work.

12-09-2012, 12:25 AM	#3
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: Need flanges for TBSS manifolds I have the tbss manifolds and I just took the ones that were bolted to the stock lm7 maniflods and swapped them over. Of course this only works if you have them. If not they are probably cheap at a junk yard Posted via Mobile Device

12-09-2012, 04:47 PM	#4
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Need flanges for TBSS manifolds I wasn't able to find any at junkyards that weren't rusted to all hell. I traced them on cardboard and had some torch cut from 3/8 steel __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD

12-10-2012, 01:33 AM	#6
BR3W CITY meowMEOWmeowMEOW Join Date: Sep 2009 Location: MKE WI Posts: 7,128	Re: Need flanges for TBSS manifolds No worries, the only thing I'll say is that if you are gonna use a hand-held torch or plasma, refrain from cutting the center holes freehand. It doesn't take much to make an ovaled hole thats hard to seal with a gasket, or go to small and hurt your flow. Mine were done on a torch table, but you can get away with a hole guide or a large enough mill or hole saw. __________________ *'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING* MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.