Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
|
01-08-2013, 01:37 PM | #1 |
Registered User
Join Date: Aug 2010
Location: AZ
Posts: 3,069
|
Re: Rear bag setups w/out notch
What andrewmp6 suggested is a good way to go and the build link is a very good example of a truck with that kit installed. We have our Pro1 air ride kit that uses the basic version of the Stage 2 and front Stage 1 kit from Porterbuilt. This kit also includes the air management as will with dual VIAIR compressors and AccuAir valve. Using the AccuAir valve allows a clean setup and the ability to upgrade to e-level if you decide later.
Pro1 Air Ride Kit http://www.azproperformance.com/Pro1...r-Bag-Kit.html That above kit will give you a lowered ride height, with the ability to air out and tuck the wheels some when parked. If you are looking to just bag the back, then I would suggest the Stage 2 basic kit, with the c-notch. From there, you can either add a simple manual air management system to control it. The basic kit is same as the deluxe, but no trailing arms or trailing arm crossmember. Stage 2 Basic Kit http://www.azproperformance.com/Port...Basic-Kit.html Travis |
Bookmarks |
|
|