How many rim sizes are there? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**rs74** · 01-19-2013, 08:07 PM

I was just reading the thread about the truck that sold at Barrett-Jackson. My 63 K20 had 17" split rims on it I think. I didn't know they come out with 19" rims as well. What other sizes of rims did they come out with and which trucks did they come on.

**rs74** · 01-21-2013, 12:34 PM

Anybody?

j.kirn · 01-21-2013, 02:08 PM

16

**60-66** · 01-21-2013, 02:34 PM

Its hard to say about the BJ 62 what was on there for sure. My guess is this wheel, 16x5.

This wheel was same for 1958-1962 for sure maybe earlier.

I have a 64 K10 with its original 16x5 "no clip" wheels, they have the nubs for the hubcaps, a 1965 K10 with its original 15x5.5 wheels. From what Im seeing 15,16 and 17.5x7 are the three half ton 4x4 wheels. 3/4 ton wheels had a few more available sizes.

padresag · 01-21-2013, 02:54 PM

here is a 15" 8stud split rim on a 62 3/4t. there was anywhere from 15-19 1/2" rims that fit the light duty trucks. you will also see either tubelss or tube type tires. tube type went with split rims

ron

**aerotruk63** · 01-21-2013, 03:22 PM

**rs74** · 01-21-2013, 10:50 PM

Thanks. Before I had my 63 K20 I would have never guessed that they would have had bigger than 15" rims.

01-19-2013, 08:07 PM	#1
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	How many rim sizes are there? I was just reading the thread about the truck that sold at Barrett-Jackson. My 63 K20 had 17" split rims on it I think. I didn't know they come out with 19" rims as well. What other sizes of rims did they come out with and which trucks did they come on.

01-21-2013, 12:34 PM	#2
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: How many rim sizes are there? Anybody?

01-21-2013, 02:08 PM	#3
j.kirn Registered User Join Date: Jun 2006 Location: MO. Posts: 970	Re: How many rim sizes are there? 16

01-21-2013, 02:34 PM	#4
60-66 Registered User Join Date: Apr 2012 Location: Wisconsin Posts: 3,329	Re: How many rim sizes are there? Its hard to say about the BJ 62 what was on there for sure. My guess is this wheel, 16x5. This wheel was same for 1958-1962 for sure maybe earlier. I have a 64 K10 with its original 16x5 "no clip" wheels, they have the nubs for the hubcaps, a 1965 K10 with its original 15x5.5 wheels. From what Im seeing 15,16 and 17.5x7 are the three half ton 4x4 wheels. 3/4 ton wheels had a few more available sizes. __________________ IS IT an EATON or Chevrolet rear axle https://67-72chevytrucks.com/vboard/...d.php?t=843778 The hubcap thread http://67-72chevytrucks.com/vboard/s...d.php?t=702839 WANTED : 1963-1966 6 Cylinder Fan Shroud WANTED :1964-1966 PANEL TRUCK Last edited by 60-66; 01-21-2013 at 04:09 PM.

01-21-2013, 02:54 PM	#5
padresag Registered User Join Date: Feb 2008 Location: Sidney,b.c. Posts: 4,425	Re: How many rim sizes are there? here is a 15" 8stud split rim on a 62 3/4t. there was anywhere from 15-19 1/2" rims that fit the light duty trucks. you will also see either tubelss or tube type tires. tube type went with split rims ron

01-21-2013, 03:22 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: How many rim sizes are there?

01-21-2013, 10:50 PM	#7
rs74 Senior Member Join Date: Jun 2010 Location: Illinois Posts: 2,957	Re: How many rim sizes are there? Thanks. Before I had my 63 K20 I would have never guessed that they would have had bigger than 15" rims.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.