So mad !! new tranny did not bolt up !!! - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

61K10 · 03-01-2013, 01:29 PM

speedo gear------

cori 64 · 03-01-2013, 01:43 PM

I would not waste my time with a th350 !!Put a 700r4 in it!!if i had a 700r4 right now you could have my th350!!

cori 64 · 03-01-2013, 01:55 PM

And my engine is in the rear position and i have a one piece drive shaft so another 3 inches forward with a 700r4 and boom no more prius passing me on the freeway!!

sevensixoh · 03-01-2013, 10:30 PM

ok so I took off the original flywheel and its a 14 inch 168 tooth flywheel. the flywheel did not bolt up to the th350 torque convertor , so I guess I need a new one. also I took a pic of the bolt holes on the block , is this a staggered or straight bolt pattern ?

losthope · 03-01-2013, 11:49 PM

this may help clarify what holes to use ,cant tell withe all the grime what you have for holes but looks like you have at least a staggered setup ,look at the link if your block has both holes threaded besides the blue circled hole you should be able to use either style starter and corresponding plate:

http://www.crankshaftcoalition.com/w...tarter_pad.jpg

Dano0579 · 03-02-2013, 12:39 AM

Since we are talking about trannies, does anyone know if a 1991 s10 5 speed manual transmission will bolt up to a 1962 235 i6 motor? Thanks for any help.

cori 64 · 03-02-2013, 02:13 AM

pretty sure the t5 will !! look in the faq section!!

Dano0579 · 03-02-2013, 02:35 AM

Quote:

Originally Posted by cori 64

pretty sure the t5 will !! look in the faq section!!

The T5 is that what that particular transmission is called? Sorry for the dum questions but i sure don't know. Thanks and I will look in the question part.

**Captainfab** · 03-02-2013, 11:56 PM

The bellhousing bolt pattern and size is different than the '63 and up I6's and all small blocks and big blocks. So you will need to keep your original bellhousing.

Quote:

Originally Posted by Dano0579

Since we are talking about trannies, does anyone know if a 1991 s10 5 speed manual transmission will bolt up to a 1962 235 i6 motor? Thanks for any help.

Dano0579 · 03-03-2013, 12:53 PM

Thanks for all the help guys. It has been very helpful. Now all I have to do is find a Brog Warner T5 and I will be good to go. Thanks all.

03-01-2013, 01:29 PM	#26
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: So mad !! new tranny did not bolt up !!! speedo gear------ __________________ 1961 chevy K10 my build is------------61K10 build

03-01-2013, 01:43 PM	#27
cori 64 Registered User Join Date: Sep 2011 Location: yucaipa Posts: 50	Re: So mad !! new tranny did not bolt up !!! I would not waste my time with a th350 !!Put a 700r4 in it!!if i had a 700r4 right now you could have my th350!!

03-01-2013, 01:55 PM	#28
cori 64 Registered User Join Date: Sep 2011 Location: yucaipa Posts: 50	Re: So mad !! new tranny did not bolt up !!! And my engine is in the rear position and i have a one piece drive shaft so another 3 inches forward with a 700r4 and boom no more prius passing me on the freeway!!

03-01-2013, 10:30 PM	#29
sevensixoh Registered User Join Date: Oct 2012 Location: El Centro , Ca Posts: 58	Re: So mad !! new tranny did not bolt up !!! ok so I took off the original flywheel and its a 14 inch 168 tooth flywheel. the flywheel did not bolt up to the th350 torque convertor , so I guess I need a new one. also I took a pic of the bolt holes on the block , is this a staggered or straight bolt pattern ? Attached Images

03-01-2013, 11:49 PM	#30
losthope Registered User Join Date: Apr 2010 Location: sacramento ca. Posts: 1,038	Re: So mad !! new tranny did not bolt up !!! this may help clarify what holes to use ,cant tell withe all the grime what you have for holes but looks like you have at least a staggered setup ,look at the link if your block has both holes threaded besides the blue circled hole you should be able to use either style starter and corresponding plate: http://www.crankshaftcoalition.com/w...tarter_pad.jpg __________________ Timmy D. "What that grinding noise?Don't worry about that it will eventually clearance itself!" 1966 chevy c10 Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=485977 1954 ford customline H.A.M.B 54 Build Thread:http://www.jalopyjournal.com/forum/s...d.php?t=622142 Last edited by losthope; 03-02-2013 at 12:07 AM.

03-02-2013, 12:39 AM	#31
Dano0579 Registered User Join Date: Feb 2013 Location: Eldridge, Alabama Posts: 105	Re: So mad !! new tranny did not bolt up !!! Since we are talking about trannies, does anyone know if a 1991 s10 5 speed manual transmission will bolt up to a 1962 235 i6 motor? Thanks for any help. __________________ Current project (My Maria) 62 Chevrolet LWB stepside 235 inline 6 cylinder http://67-72chevytrucks.com/vboard/s...d.php?t=569873 Dano

03-02-2013, 02:13 AM	#32
cori 64 Registered User Join Date: Sep 2011 Location: yucaipa Posts: 50	Re: So mad !! new tranny did not bolt up !!! pretty sure the t5 will !! look in the faq section!!

03-03-2013, 12:53 PM	#35
Dano0579 Registered User Join Date: Feb 2013 Location: Eldridge, Alabama Posts: 105	Re: So mad !! new tranny did not bolt up !!! Thanks for all the help guys. It has been very helpful. Now all I have to do is find a Brog Warner T5 and I will be good to go. Thanks all. __________________ Current project (My Maria) 62 Chevrolet LWB stepside 235 inline 6 cylinder http://67-72chevytrucks.com/vboard/s...d.php?t=569873 Dano



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.