2-Piece Driveshaft Noise - Carrier? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

70cst10 · 03-31-2002, 04:49 PM

I replaced mine last summer. I've driven the truck about 9000 miles since, and it's making the same noise. It's a higher pitched whine that comes and goes over about 10mph. I've heard that it's due to the fact I left the dust shields on with the new bearing. I need to replace that and my rear shocks. I think my u joints are going too. I'm getting a bit of vibration.

------------------
milanplechata@hotmail.com

Lexington, SC

1968 c/10 lwb 250/3 on the tree
1970 CST/10 lwb no motor/trans

http://communities.msn.com/6772GMTru...68longbed.msnw

Every man dies, but not every man truly lives..

03-31-2002, 04:49 PM	#1
70cst10 Senior Member Join Date: Jun 2001 Location: Gaston, SC Posts: 580	I replaced mine last summer. I've driven the truck about 9000 miles since, and it's making the same noise. It's a higher pitched whine that comes and goes over about 10mph. I've heard that it's due to the fact I left the dust shields on with the new bearing. I need to replace that and my rear shocks. I think my u joints are going too. I'm getting a bit of vibration. ------------------ milanplechata@hotmail.com Lexington, SC 1968 c/10 lwb 250/3 on the tree 1970 CST/10 lwb no motor/trans http://communities.msn.com/6772GMTru...68longbed.msnw Every man dies, but not every man truly lives.. __________________ Milan 1964 Chevelle SS 283/M20



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.