trailing arm axle perches..where to get? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

skeeterbug · 03-24-2013, 02:44 PM

I will be fitting the refurbished/narrowed ford 9" unit under my truck hopefully this week. When I talked with the guy at Moser Friday he said it would be back on the truck coming my way in two working days. Anyways where have you guys been getting replacement axle perches for trailing arm susp., I found some through cpp but damn that $45.00 plus freight! I will not pay that much for a piece of steel that's made in china or somewhere for .50 cent. There has to be a better option?

bigboybodry · 03-24-2013, 03:21 PM

check with classic performance parts they have them.
6072RAS Weld-on axle seats for 3 Inch diameter axles $39.00

moggey01 · 03-24-2013, 03:36 PM

What size axle tubes do you have? I have a set from speedway engineering that where fit for a bigger tube.

skeeterbug · 03-24-2013, 07:05 PM

3.125

moggey01 · 03-26-2013, 03:32 AM

The set I have was fit for a 3.5" tube.

vin63 · 03-26-2013, 08:32 AM

I usually purchase them through Early Classics: Part # 02-8005 - $39.

http://earlyclassic.com/catalog.aspx

**Captainfab** · 03-28-2013, 12:17 AM

Trailing arm mounts for $39.00 is a good deal. Mine are much more than that. I can't make them any cheaper than what I sell them for.

funnyfarmracer · 04-04-2013, 05:24 PM

Hot Rods to Hell in california.

03-24-2013, 02:44 PM	#1
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	trailing arm axle perches..where to get? I will be fitting the refurbished/narrowed ford 9" unit under my truck hopefully this week. When I talked with the guy at Moser Friday he said it would be back on the truck coming my way in two working days. Anyways where have you guys been getting replacement axle perches for trailing arm susp., I found some through cpp but damn that $45.00 plus freight! I will not pay that much for a piece of steel that's made in china or somewhere for .50 cent. There has to be a better option? __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

03-24-2013, 03:21 PM	#2
bigboybodry Registered User Join Date: Jul 2009 Location: Florence,Mississippi Posts: 301	Re: trailing arm axle perches..where to get? check with classic performance parts they have them. 6072RAS Weld-on axle seats for 3 Inch diameter axles $39.00 __________________ first track pass with the new motor on motor http://youtu.be/YgrJaEF_TaQ Last edited by bigboybodry; 03-24-2013 at 03:33 PM.

03-24-2013, 03:36 PM	#3
moggey01 Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 315	Re: trailing arm axle perches..where to get? What size axle tubes do you have? I have a set from speedway engineering that where fit for a bigger tube.

03-24-2013, 07:05 PM	#4
skeeterbug Registered User Join Date: Jul 2009 Location: watertown, tn Posts: 332	Re: trailing arm axle perches..where to get? 3.125 __________________ '71 LWB c10-"WORK" in progress 385 ci 4 bolt (4.040 bore), scat 6.0" forged h beams,scat forged crank 3.750, speed pro 5cc flat top, clevite bearings, .039 head gaskets,comp xr288hr 110* 288/294adv. 236/242@.50 555/576 lift, pbm hyd roller lifters, chad spiers 215cc imp. heads , comp 1.6 roler rockers, comp magnum push rods, edelbrock victor jr. single plane intake p&p (1206 gasket matched), quickfuel 750R DP , th 350 trans, 5.14 gear, 3000 stall 2012 best 1/8- 7.70 @ 87mph 1.70 60' (lil better) 2013 best 7.39 2014 best-7.38 New for 2013-strange rear coilovers, headman 1-3/4 headers, 5.13 r&p, .060 aluminum bed floor, 15x14 holeshots w/ 31x18.5 hoosier dot pro's, 15x4 holeshots w/ 26x5.5 m/t skinnies and 200+#'s in body weight loss & 6 point cage

03-26-2013, 03:32 AM	#5
moggey01 Registered User Join Date: Apr 2011 Location: Houston Texas Posts: 315	Re: trailing arm axle perches..where to get? The set I have was fit for a 3.5" tube.

03-26-2013, 08:32 AM	#6
vin63 It's Better With Nitro Join Date: Apr 2008 Location: Chino Hills, CA Posts: 2,262	Re: trailing arm axle perches..where to get? I usually purchase them through Early Classics: Part # 02-8005 - $39. http://earlyclassic.com/catalog.aspx __________________ 1963 C-10: Deluxe-optioned cab, shortbed, fleetside Pontiac 462 ci, Kauffman D-Port alum. heads 4L80E, narrowed sheetmetal Ford 9-inch Tubular front and rear suspension Custom 6-piston front disc and 4-piston rear disc brakes

03-28-2013, 12:17 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,254	Re: trailing arm axle perches..where to get? Trailing arm mounts for $39.00 is a good deal. Mine are much more than that. I can't make them any cheaper than what I sell them for. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

04-04-2013, 05:24 PM	#8
funnyfarmracer Registered User Join Date: Jun 2008 Location: porter texas Posts: 57	Re: trailing arm axle perches..where to get? Hot Rods to Hell in california.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.