Clearence Question

[MrMilks]

So I have an 85 Short wheel base and I'm wanting to do a 2/4 drop with some 20x8.5 rims. My question is will 255/45/20 tires work and clear the wheel arch when turning?

[stroker87]

Originally Posted by MrMilks

So I have an 85 Short wheel base and I'm wanting to do a 2/4 drop with some 20x8.5 rims. My question is will 255/45/20 tires work and clear the wheel arch when turning?

the tire size should not be a problem that size is a little over 29" its the offset of the rim i think that your going to have to worry about but on mine with the 2/4 drop the factory tire size 28" tall tire with a 4" back space of the factory rallies tires clears every thing with a ton of room (the 15" rim though will not work any more hits the lower control arm)

i'm sure one one with a little more knowledge with chime in

[J Knight]

WARNING
There is a 98% chance you will want to go lower than 2/4in within one years time.
Posted via Mobile Device

[88Jimmy4x4]

Originally Posted by J Knight

WARNING
There is a 98% chance you will want to go lower than 2/4in within one years time.
Posted via Mobile Device

and after lowering to 5/7 you will want air bags...pssst pssst LOL

[MrMilks]

I just looked and the offset is 0mm and to be honest idk what offset is. If someone could explain I'd appriciate it.
Posted via Mobile Device

[MrMilks]

Is it good to have more backspace or less?

[88Jimmy4x4]

Zero offset on 20x8.5 should be fine
Posted via Mobile Device

[MrMilks]

Thanks man!
Posted via Mobile Device