FS/Burb Barn Doors ...PICS - The 1947 - Present Chevrolet & GMC Truck Message Board Network

GMCjunkie · 10-22-2003, 06:45 AM

Heres pics of my barn doors for thoes who were interested. Sorry it took so long. I have the "arms" for the doors and a bucket of hardware including the handles, its all just the way I bought them, except that Ive done some sanding on the doors. Lemmie know if y'all have any questions. If you have the gate/hatch doors that you'd like to trade, please post pics. Surface rust is "doable" but, I dont wanna have to mess with major body work. $200.00 PLUS SHIPPING. I also have the door weather stripping still in the package available for purchase.
thanks,
junk

GMCjunkie · 10-22-2003, 06:46 AM

Old weather strip has been removed.

GMCjunkie · 10-22-2003, 06:48 AM

bottom of doors, both are about the same. A few small holes along seam.

GMCjunkie · 10-22-2003, 06:50 AM

bottom of door

GMCjunkie · 10-22-2003, 06:50 AM

5

GMCjunkie · 10-22-2003, 06:52 AM

Only dent on the out side. bottom corner of door, small and shallow.

GMCjunkie · 10-22-2003, 06:53 AM

Last one. Two little holes, where I believe there was some kind of a light attached to it.

smonty · 10-22-2003, 10:06 AM

Those two holes are from a license plate bracket that had a light on it.

Ernie

GMCjunkie · 10-23-2003, 05:23 AM

Thanks Ernie.......

:p

**Gary 70 Jimmy** · 10-23-2003, 08:59 PM

I have a good gate and hatch off a 71 GMC burb for
$400.00 if interest let me know I can get pcs. I will
be in Georgia next week I need your email address
to send pcs

GMCjunkie · 10-24-2003, 05:18 AM

Gary, Thanks darlin, but I couldnt do $400.00 right now if I had to.

My email is in my profile. If its not too much trouble you can send pics. Never know when things will change finantially. Thanks again.

GMCjunkie · 10-24-2003, 07:32 PM

ttt

GMCjunkie · 10-26-2003, 06:23 AM

TTT

GMCjunkie · 10-26-2003, 03:43 PM

ttt

**68 Stepside** · 10-26-2003, 04:22 PM

Ouch Junks....I'm getting ready to put my full set of panel doors up for sale....if you can't get 200.00 for a set of clean barn doors, I know I won't get what I want from mine

Good luck :p

ttt

GMCjunkie · 10-26-2003, 07:09 PM

Hey, TOJO!! I think things are just tuff all over. Plus there just may not be a big need for the Barn doors. I paid 200.00 for them about 2 years ago and have since started cleaning them up, so I know theyre not over priced. My gate/hatch doors have been bubbling bad along the bottom of the gate. Today the bubbles seperated and now I have a bout a 10 inch crack in my door, theyre just wasted.

Im really afraid to open the gate for fear of it just falling apart.

Just need to take things one day at a time. Good luck selling your panel doors.
take care
junk

GMCjunkie · 11-03-2003, 06:30 AM

T-T-T

Grim Reaper · 11-19-2003, 10:38 PM

Hmmmmm those look familure.

Yeah there was a lite with a license plate bracket screwed to the door where the two holes are. It was ugly! Wish I had kept that truck.

Top for the lady.

10-22-2003, 06:45 AM	#1
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	FS/Burb Barn Doors ...PICS Heres pics of my barn doors for thoes who were interested. Sorry it took so long. I have the "arms" for the doors and a bucket of hardware including the handles, its all just the way I bought them, except that Ive done some sanding on the doors. Lemmie know if y'all have any questions. If you have the gate/hatch doors that you'd like to trade, please post pics. Surface rust is "doable" but, I dont wanna have to mess with major body work. $200.00 PLUS SHIPPING. I also have the door weather stripping still in the package available for purchase. thanks, junk Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:46 AM	#2
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Old weather strip has been removed. Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:48 AM	#3
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	bottom of doors, both are about the same. A few small holes along seam. Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:50 AM	#4
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	bottom of door Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:50 AM	#5
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	5 Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:52 AM	#6
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Only dent on the out side. bottom corner of door, small and shallow. Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 06:53 AM	#7
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Last one. Two little holes, where I believe there was some kind of a light attached to it. Attached Images __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-22-2003, 10:06 AM	#8
smonty Smonty Join Date: Mar 2001 Location: Mesquite, TX, USA Posts: 769	two holes in door Those two holes are from a license plate bracket that had a light on it. Ernie __________________ 72 2WD Blazer 68 SWB Fleetside 67 SWB Stepside 2005 Chevy 1500HD Crewcab 56 Chris Craft Mahogany Runabout Looking for 36 Chevy 1/2 Ton P/U Project

10-23-2003, 05:23 AM	#9
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Thanks Ernie....... :p __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-23-2003, 08:59 PM	#10
Gary 70 Jimmy Senior Member Join Date: Jan 2002 Location: Burghill, Ohio 44404 Posts: 3,401	I have a good gate and hatch off a 71 GMC burb for $400.00 if interest let me know I can get pcs. I will be in Georgia next week I need your email address to send pcs

10-24-2003, 05:18 AM	#11
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Gary, Thanks darlin, but I couldnt do $400.00 right now if I had to. My email is in my profile. If its not too much trouble you can send pics. Never know when things will change finantially. Thanks again. __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-24-2003, 07:32 PM	#12
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	ttt __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-26-2003, 06:23 AM	#13
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	TTT __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-26-2003, 03:43 PM	#14
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	ttt __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

10-26-2003, 04:22 PM	#15
68 Stepside huh? Join Date: May 2000 Location: Washington, Illinois Posts: 5,690	Ouch Junks....I'm getting ready to put my full set of panel doors up for sale....if you can't get 200.00 for a set of clean barn doors, I know I won't get what I want from mine Good luck :p ttt __________________ Someday when I'm lonely, Wishing you weren't so far away, Then I will remember Things we said today. RIP El Jay



Register or Log In To remove these advertisements.

10-26-2003, 07:09 PM	#16
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	Hey, TOJO!! I think things are just tuff all over. Plus there just may not be a big need for the Barn doors. I paid 200.00 for them about 2 years ago and have since started cleaning them up, so I know theyre not over priced. My gate/hatch doors have been bubbling bad along the bottom of the gate. Today the bubbles seperated and now I have a bout a 10 inch crack in my door, theyre just wasted. Im really afraid to open the gate for fear of it just falling apart. Just need to take things one day at a time. Good luck selling your panel doors. take care junk __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

11-03-2003, 06:30 AM	#17
GMCjunkie Dude...I'm a CHICK Join Date: Jul 2000 Location: Lakeland Georgia Posts: 6,192	T-T-T __________________ ~~~~~~~~~~~~~* "The unexamined life is not worth living" -Socrates ~~~~~~~~~~~~~* '71 GMC Suburban 4x4

11-19-2003, 10:38 PM	#18
Grim Reaper Registered User Join Date: Jul 2001 Location: Atlanta GA Posts: 1,704	Hmmmmm those look familure. Yeah there was a lite with a license plate bracket screwed to the door where the two holes are. It was ugly! Wish I had kept that truck. Top for the lady. __________________ Grim-Reaper 70 Pontiac LeMans Sport Convertible, worlds longest resto in progress Looking for 71-72 2wd Blazer or Jimmy Project

Register or Log In To remove these advertisements.