|
03-11-2013, 04:37 PM
|
#1 |
|
Registered User
Join Date: Nov 2012
Location: Miles City MT
Posts: 241
|
4x4 Headers BBC 73-87
Need part #'s for 2 inch or bigger primarys.
I found some a while back & cannot find where I stored that information. Must be for 4x4. |
|
|
|
03-19-2013, 03:34 PM
|
#2 |
|
Registered User
Join Date: Nov 2012
Location: Miles City MT
Posts: 241
|
Re: 4x4 Headers BBC 73-87
Anybody?
|
|
|
|
|
05-21-2013, 09:25 PM
|
#3 |
|
Registered User
Join Date: Nov 2012
Location: Miles City MT
Posts: 241
|
Re: 4x4 Headers BBC 73-87
http://www.jegs.com/i/Hooker/520/2455/10002/-1
Well I bought these. They fit really decent. The drivers side motor mount needed a little trimming. The passenger side clears well it is a little tight to the rear shackle, but I can live with it. I put them into a 73-79 frame with a 4 speed & 205. The pass side is kinda tight to the 205, but I think I can get a full 3 in. system through it. Good luck! |
|
|
|
|
05-21-2013, 09:27 PM
|
#4 |
|
Registered User
Join Date: Nov 2012
Location: Miles City MT
Posts: 241
|
Re: 4x4 Headers BBC 73-87
http://www.jegs.com/i/Hooker/520/2455/10002/-1
Well I bought these. They fit really decent. The drivers side motor mount needed a little trimming. The passenger side clears well it is a little tight to the rear shackle, but I can live with it. I put them into a 73-79 frame with a 4 speed & 205. The pass side is kinda tight to the 205, but I think I can get a full 3 in. system through it. Good luck! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
