Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
06-05-2013, 12:13 PM | #1 |
Registered User
Join Date: Nov 2012
Location: DFW, TX
Posts: 298
|
anyone use one of these for steam port?
Guys
Im trying to figure out my steam port vent routing. A lot of guys just tap into water pump (but if wp goes out, gotta do that again... in parking lot of oreillys ) and some guys run this tee from jags that run. and that looks like a nice piece, but then you see it up front right when you pop the hood. I know that the trailblazer ss's come from the factory with the steam port entering the water pump inlet. So i was thinking of using a tee right there. it wouldnt be as visible as the upper radiator tee and its cheaper... my steam port vent hose is 5/16" and this tee is 3/8" but that should work. anyone ever use one of these? dorman 47112 http://www.oreillyauto.com/site/c/de...&keyword=47112 |
06-05-2013, 04:13 PM | #2 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: anyone use one of these for steam port?
I used a smaller brass piece to tap mine into the heater core lines, which is pretty easy to do.
As for having to tap it in an oreilly parking lot; thats what the gold AAA card is for.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
06-09-2013, 03:33 PM | #3 |
Registered User
Join Date: Sep 2012
Location: clearmont mo.
Posts: 75
|
Re: anyone use one of these for steam port?
My radiator had a screw in fitting for the heater hose I jus bought brass fittings and a barb fitting and ran it into there along the upper hose as the stock hose runs across my fan shroud. Not sure if this is a no no or not but seems to work fine. If u need pics let me know.
Posted via Mobile Device
__________________
Dan G Lift it, fat chicks cant jump! 83 Chevy shortbed 4x4: 6.0 ls powered 97 Chevy 3/4 ton ex cab 454: work horse 00 Chevy camaro: daily driver 83 Chevy 3/4 ton: dads old rig |
06-09-2013, 08:47 PM | #4 |
Registered User
Join Date: Jan 2012
Location: Petal,Ms.
Posts: 428
|
Re: anyone use one of these for steam port?
BR3W where did you find the brass tee?
|
06-10-2013, 09:09 AM | #5 | |
Boosted Member
Join Date: May 2002
Location: Mackinaw, IL
Posts: 2,200
|
Re: anyone use one of these for steam port?
Quote:
I've been around enough LS engines to know that the water pumps last foreeevvvverrrrrr. I'm not at all concerned that the pump will puke on a roadtrip and that it would ever be an issue. $.02
__________________
1972 2wd K/5 Blazer Turbocharged 370 LSx - 941 rwhp / 1093 rwtq 1969 Chevy K-10 L33 5.3 / 4L80E / NP241 / 4" lift 1964 Buick Skylark Twin TURBO 383 LS pro-touring project 2014 VW Passat TDI - Daily Driver Turbo diesel 2015 Sierra Denali HD Duramax Turbo diesel 2023 Ford Explorer ST - Twin Turbskis 2023 Ford F150 RCSB - Whipple Supercharged 2017 Polaris RZR Turbo 2014 Nor-Tech Center Console - Twin Supercharged Outboards TURBO ALL THE THINGS!! |
|
06-10-2013, 02:16 PM | #6 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: anyone use one of these for steam port?
Parts store, the heater lines are small enough that they don't require a special over size tee.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
Bookmarks |
|
|