lowered question

[Robznob11]

well you can run 78-87 front end and get 3" spindles and springs. on 67-72 im pretty sure 2.5 is the lowest spindles you can get. imo 3" drop springs are too much. bad ride and alignment sux. you can get a 6" spring out back and a 2" block but you need a notch if you go with a block. some people make there own 3" blocks but this puts the arms real close to the ground not good! that is why I chose to go with the channel job, caus you get the low look with a better ride and geometry. and more arm clearance front/back