The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Racing and high performance (trucks haulin more than hay)

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 05-17-2013, 09:18 AM   #1
funnyfarmracer
Registered User
 
Join Date: Jun 2008
Location: porter texas
Posts: 57
I'm sure this has been covered but....

Best springs for bbc powered LWB 69 chevy??? Is pinion angle even an issue with these trucks??? Good cheap shocks???


Starting a new project.

69 lwb 1/2 ton
ho 72 rear diff with 4.57 gears
468 BBc oval ports, mild flat tappet cam, forged pistons and lots of nitrous.
two plates a cheater and a big shot
th350 3200 stall



just want cheap fun as you can tell
funnyfarmracer is offline   Reply With Quote
Old 05-17-2013, 04:36 PM   #2
Blue Rat
Registered User
 
Join Date: Dec 2010
Location: Arkansas
Posts: 608
Re: I'm sure this has been covered but....

Sounds like that is going to get to be $$$$
Posted via Mobile Device
Blue Rat is offline   Reply With Quote
Old 05-17-2013, 06:59 PM   #3
funnyfarmracer
Registered User
 
Join Date: Jun 2008
Location: porter texas
Posts: 57
Re: I'm sure this has been covered but....

Quote:
Originally Posted by Blue Rat View Post
Sounds like that is going to get to be $$$$
Posted via Mobile Device
Not really. I already have all the parts just want to get it to hook on the cheap and be fun. I want my boys to be able to drive it too.
funnyfarmracer is offline   Reply With Quote
Old 05-18-2013, 09:39 AM   #4
Blue Rat
Registered User
 
Join Date: Dec 2010
Location: Arkansas
Posts: 608
Re: I'm sure this has been covered but....

Quote:
Originally Posted by funnyfarmracer View Post
Not really. I already have all the parts just want to get it to hook on the cheap and be fun. I want my boys to be able to drive it too.
That is a plan!

Wish I had all my parts!
Blue Rat is offline   Reply With Quote
Old 05-30-2013, 06:10 PM   #5
gofastnut
Registered User
 
gofastnut's Avatar
 
Join Date: Feb 2011
Location: Williams, CA
Posts: 760
Re: I'm sure this has been covered but....

Are you lowering it? You might take a look at pinion angle...
Don't go too cheap on the shocks, you'll regret it. Unless you're trying to get your suspension figured out and NEED something. Then by all means, go cheap!
__________________
Jeff
96 C3500 Crew Cab Long bed (Waiting on Cool Name)
64 C-10 shortie stepside, "Ole Brownie"
C-10 Club
My achingly slow build: http://67-72chevytrucks.com/vboard/s...d.php?t=508345
gofastnut is offline   Reply With Quote
Old 05-30-2013, 09:28 PM   #6
Super73
Registered User
 
Super73's Avatar
 
Join Date: Nov 2007
Location: Bay Area, Ca
Posts: 2,841
Re: I'm sure this has been covered but....

There is no true answer to your question with out more info. Front and rear weights along with compressed height based on desired ride height are parts of the puzzle. That info will allow us to help give you an educated guess.
Posted via Mobile Device
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
Super73 is offline   Reply With Quote
Old 06-25-2013, 11:55 PM   #7
low&slow
Account Suspended
 
Join Date: Jan 2009
Location: Kuna, Idaho
Posts: 1,046
Re: I'm sure this has been covered but....

Without getting all technical on you, I assume the truck isn't lowered and the suspension parts are stock excluding the rear end. For cheap fun, I say just go buy new shocks. They will be stiffer that your old worn out ones. And get some fatter tires. Also with all the Nitrous, try leaving at a lower rpm or not use the nos right off the launch. I'd say that's about as cheap as you can go if you're just wanting some fun on the weekends. If you want to not go cheap, then listen to the guys above lol
low&slow is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com