11-29-2003, 02:13 AM | #1 |
Registered User
Join Date: Aug 2003
Location: Fort Worth Texas
Posts: 275
|
Dumb thing to do
I left my hatch open and tried to drive out of
the parking garage. The handle cought on a light cover on the celling and snaped it off flush. Two problems: 1. Can't get it open. 2. Need to find a new handle with key. Any help will be Appreciated !
__________________
Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html |
11-29-2003, 04:28 AM | #2 |
Member since 2000
Join Date: Dec 2000
Location: Mountain View Ca / Mexico
Posts: 7,874
|
i've been told if i wanted a new handle to go to one of those truck camper places and buy the handle assembly. just a thought.
|
11-29-2003, 05:50 AM | #3 |
Not a bad nut after all..
Join Date: Dec 2000
Location: ND
Posts: 1,759
|
Buy a garage door T-handle from a hardware store for about $8, cut the shaft to length, and move over your internal mechanism. Cosmetically it will differ and you will lose the flapper door in the key hole, but I've done this to my Blazer and it works. I know of no better source at this time.
Good luck! |
11-29-2003, 07:04 AM | #4 |
Senior Member
Join Date: Feb 2002
Location: Tucson, AZ USA
Posts: 7,505
|
BTDT
To open the hatch try pulling on the relay rods from inside with a needlenose vicegrips til it clicks, then do the other side.
Golden State sells a replacement handle, but it's not OEM and requires some modification. |
11-29-2003, 03:22 PM | #5 |
Registered User
Join Date: Aug 2003
Location: Fort Worth Texas
Posts: 275
|
Thanks everybody!
how about a used one out there
__________________
Joe Peters the HatGuy 72' K5 Highlander My Daily Driver http://www.pbhats.com/BLAZER/index.html |
Bookmarks |
|
|