Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
07-25-2013, 05:42 AM | #7 |
Registered User
Join Date: Nov 2011
Location: concord ca
Posts: 28
|
Re: need help picking out parts to drop my 73
I have a lower cup and upper bag plate for the front very simple to install the hardest part of the whole thing was probably drilling through the upper spring pocket cross member to mount plate but it wasn't to bad as long as you get some good drill bits I used some harbor freight step bits and it was not bad. So with that kit you can get low but if you want to go lower then you have to cup the lower control arm its basically cutting out the bottom of the spring pocket on the lower control arm and adding in a 8-9 inch round pipe so that the bag can site lower in the pocket therefor would get a whole lot lower than the upper plate and cup kit just depends how low your trying to go I have 29s and I had to remove my inner fenders when aired all the way out I plan in getting some sheet metal and making some new later on down the line. And I'm using Dom 2600 bags. Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device |
Bookmarks |
|
|