|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
07-29-2013, 12:07 AM
|
#1 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
oil coming out of breather.
I just got my old truck back and now when i bring it off Idle and get into the mid rpm range it forces oil out of the breather hole on the drivers valve cover.
The holley I have on the carb does not have a large PVC port on it so its not hooked up now. Is this causing the oil to come out? too much crank case preassure maybe. if so I can T is off were the power break fitting is right? thanks.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
07-29-2013, 08:27 AM
|
#2 |
|
Registered User
Join Date: Jul 2009
Location: washington
Posts: 4,178
|
Re: oil coming out of breather.
Tee it off to the manifold. You don't want to conprimise the brakes in any way
Posted via Mobile Device
__________________
377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511 |
|
|
|
|
07-29-2013, 08:35 AM
|
#3 |
|
Robert Olson Transport
 
Join Date: Oct 2002
Location: recent transplant to NC USA
Posts: 20,310
|
Re: oil coming out of breather.
definitely your problem
__________________
Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!! |
|
|
|
|
07-31-2013, 08:17 AM
|
#4 |
|
Registered User
Join Date: Jul 2009
Location: Thibodaux, LA
Posts: 479
|
Re: oil coming out of breather.
ok thank you. can I use any port on the manifold that has a pipe plug in it? have one on both sides of the distributor but they are on intake runners so wasnt sure if they are for coolant sensors. IF not i will use the vacuum port that my trans vacuum is hooked to.
__________________
"Buckle up I wanna try somethin!!" "of course it will hold!, I welded it!" 1977 c10 under knife for full rebuild, 5.3l 4l60e drive rain swap, replacement frame and green repaint |
|
|
|
|
| Bookmarks |
|
|
Linear Mode
