My new truck - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4x4toy · 05-30-2013, 04:17 PM

Ok, I just offered a guy some money for a 1961 C60, and he accepted. Now what? LOL. Didn't think he would take my offer. Now I need to find a master cylinder for it. I don't know where to get parts for these classic heavy trucks.I have some pictures on my phone, I will try to post them here soon. It is green with an inline 6, manual trans, 2 speed rear, hyd drum brakes, a wooden stake body on it that seems to be endless in length. Hope the wife thinks its cool!!!

4x4toy · 05-30-2013, 04:57 PM

picture attempt

4x4toy · 05-30-2013, 05:09 PM

Think I figured out the pictures thing.

Cool ass truck, huh?

alabama mike · 05-30-2013, 06:12 PM

Thats a good looking truck, most body parts will interchange with 1/2 tons except the front fenders, You can still get master cyl, and wheel cyl through Napa or Carquest, good luck on your project!

C10 - C90 Bill · 05-30-2013, 08:35 PM

Nice truck! Looks pretty clean and looks like it has nice straight sheet metal. Check on your wheels though. They could be "Widow Makers".

Bill

flashed · 05-30-2013, 09:21 PM

Does it say $800 on the sideboard ,and you offered and got it for less ? I would have given the $800 and thought it a bargain .Nice old truck .

*Peanutbutter* · 05-30-2013, 11:03 PM

Thats alot better looking than some of the stuff I bring home, did good. Does it happen to have a hoist under it?

Flat 67 · 05-30-2013, 11:42 PM

Quote:

Originally Posted by 4x4toy

Hope the wife thinks its cool!!!

Mr 4x4,

That is one nice looking truck. It sure looks solid and rust free. You made a good buy. Is there any explaining to your wife that you need help with? LOL

Flat67

diablo03 · 05-31-2013, 07:29 AM

Now what? You sell it to me when your wife gets mad....lol

No really, that's a great buy

4x4toy · 05-31-2013, 08:23 AM

Going to get a battery for her today. I am going to try and get going and get it home today. Showed pictures to the wife yesterday, told her I bought it for her. She was not impressed, so I gave her some money to go get her nails done. She got over it. The stake body is not a tilt or anything. This was an old tobacco truck from the area. Very straight sheet metal. Yes I paid less than the 800 asking price. Can't wait to get the truck home and wash it. I was wondering about the wheels myself, will have to get some modern wheels for it.

alsriv2 · 05-31-2013, 12:57 PM

If you find any others in that condition near that price, please give me a shout!

4x4toy · 05-31-2013, 04:38 PM

Definatly need to get some wheels for her, has the center split Firestone wheels. Needs brake work, no brakes whatsoever. Water pump leaks, needs hoses and a belt too. Need to cut the stake body back some, overhangs the frame aleast 5 feet. I will post some more pictures soon.
Posted via Mobile Device

4x4toy · 06-01-2013, 06:02 PM

Wondering if an Izusu NPR would be a good donor for a modern drivetrain, axles, brakes, wheels, A/C, heat. Got to go get my tape measure and find an NPR now. 4cylinder diesel with auto trans, I can see it now.
Posted via Mobile Device

C10 - C90 Bill · 06-01-2013, 09:14 PM

Well, if it were mine, I'd be keeping it all original. With a little bit of work, you would have it fixed and ready for the road in no time.

Bill

4x4toy · 06-01-2013, 09:39 PM

Cleaned her up inside and out today. Cut the stake body even with frame, stake body is in sad shape. Body looks real good, has some rust issues in the
bottoms of fenders and sides of hood. Roof gutter is surfaced rusted, I will clean that up ASAP, treat the rust that I can't remove and seal it with some
epoxy primer to keep it as good as possible.

Posted via Mobile Device

4x4toy · 06-02-2013, 10:33 AM

Quote:

Originally Posted by C10 - C90 Bill

Well, if it were mine, I'd be keeping it all original. With a little bit of work, you would have it fixed and ready for the road in no time.

Bill

Realistically I will repair the original equipment. My first step is to find some different wheels and tires for it.Then rebuild the brake system. I think the hardest parts right now will be the wheels, I don't even like looking at the center split wheels, LOL. But if I can't find brake parts for it don't want to be out money for the wheels and tires if I have to ultimately change out the axle and front suspension. Talking to a friend of mine at the fire house last night, he seems to think all the parts are available at Fleet Pride. Last truck he did was a Ford that is where he picked up his parts.

flashed · 06-02-2013, 02:57 PM

Regardless of what you do with it ,you did good on it .Cant wait to see where this one goes .

C10 - C90 Bill · 06-02-2013, 05:48 PM

As your friend has mentioned, all the parts should be available with no problem. Although you may have to order them. There is a guy on another truck board I belong to who is pretty good at finding parts and the part numbers that you would need. Let us know if you need any extra help with it.

There is also a Wheel expert on the other board. His name is Grigg. Both these guys are at Stovebolt.com in the Big Bolts section.

Bill

Katrina/10 · 07-22-2013, 07:33 PM

delete

inthearmynow · 07-23-2013, 10:46 PM

that's a nice truck

oklalawnboy · 08-04-2013, 07:42 PM

Great looking truck! I only wish I could find one like that. What a deal!

05-30-2013, 04:17 PM	#1
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	My new truck Ok, I just offered a guy some money for a 1961 C60, and he accepted. Now what? LOL. Didn't think he would take my offer. Now I need to find a master cylinder for it. I don't know where to get parts for these classic heavy trucks.I have some pictures on my phone, I will try to post them here soon. It is green with an inline 6, manual trans, 2 speed rear, hyd drum brakes, a wooden stake body on it that seems to be endless in length. Hope the wife thinks its cool!!! __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

05-30-2013, 04:57 PM	#2
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck picture attempt __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax Last edited by 4x4toy; 05-30-2013 at 05:10 PM. Reason: suck at posting pictures

05-30-2013, 05:09 PM	#3
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck Think I figured out the pictures thing. Cool ass truck, huh? __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

05-30-2013, 06:12 PM	#4
alabama mike Registered User Join Date: Jun 2011 Location: cullman, alabama Posts: 75	Re: My new truck Thats a good looking truck, most body parts will interchange with 1/2 tons except the front fenders, You can still get master cyl, and wheel cyl through Napa or Carquest, good luck on your project! __________________ Disabled Vet, Desert Shield/Desert Storm Veteran "Proud to have served" 1965 C-10, 1965 C-60, 1966 C-10, 1975 C-20, 1986 M1009 Blazer, 1987 GMC 1/2 ton suburban, 1995 1500 Suburban 4x4, 2001 2500 Suburban 8.1L

05-30-2013, 08:35 PM	#5
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,094	Re: My new truck Nice truck! Looks pretty clean and looks like it has nice straight sheet metal. Check on your wheels though. They could be "Widow Makers". Bill __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

05-30-2013, 09:21 PM	#6
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: My new truck Does it say $800 on the sideboard ,and you offered and got it for less ? I would have given the $800 and thought it a bargain .Nice old truck .

05-30-2013, 11:03 PM	#7
Peanutbutter Account Suspended Join Date: Feb 2013 Location: Mesa, Colorado Posts: 450	Re: My new truck Thats alot better looking than some of the stuff I bring home, did good. Does it happen to have a hoist under it?

05-31-2013, 07:29 AM	#9
diablo03 Registered User Join Date: Apr 2013 Location: St Louis MO Posts: 151	Re: My new truck Now what? You sell it to me when your wife gets mad....lol No really, that's a great buy __________________ 1963 Chevy C10 (under construction).....build thread 2009 Honda Shadow 2008 Mazda 5 2013 Ford Sedan Interceptor AWD 2017 Harbor Freight 4x8 trailer (great for hauling parts) 2017 Honda Rebel

05-31-2013, 08:23 AM	#10
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck Going to get a battery for her today. I am going to try and get going and get it home today. Showed pictures to the wife yesterday, told her I bought it for her. She was not impressed, so I gave her some money to go get her nails done. She got over it. The stake body is not a tilt or anything. This was an old tobacco truck from the area. Very straight sheet metal. Yes I paid less than the 800 asking price. Can't wait to get the truck home and wash it. I was wondering about the wheels myself, will have to get some modern wheels for it. __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

05-31-2013, 12:57 PM	#11
alsriv2 Registered User Join Date: Sep 2010 Location: Formerly MD and San Diego, now loving life in Arizona Posts: 1,636	Re: My new truck If you find any others in that condition near that price, please give me a shout! __________________ Alan 2012 Ram 3500 Dually Crew Cab 6.7 Cummins 2014 Palomino Columbus 340RK 5th wheel '69 Chevy C10 396BB

05-31-2013, 04:38 PM	#12
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck Definatly need to get some wheels for her, has the center split Firestone wheels. Needs brake work, no brakes whatsoever. Water pump leaks, needs hoses and a belt too. Need to cut the stake body back some, overhangs the frame aleast 5 feet. I will post some more pictures soon. Posted via Mobile Device __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

06-01-2013, 06:02 PM	#13
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck Wondering if an Izusu NPR would be a good donor for a modern drivetrain, axles, brakes, wheels, A/C, heat. Got to go get my tape measure and find an NPR now. 4cylinder diesel with auto trans, I can see it now. Posted via Mobile Device __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax

06-01-2013, 09:14 PM	#14
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,094	Re: My new truck Well, if it were mine, I'd be keeping it all original. With a little bit of work, you would have it fixed and ready for the road in no time. Bill __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

06-01-2013, 09:39 PM	#15
4x4toy Registered User Join Date: Jan 2009 Location: Southern Md Posts: 228	Re: My new truck Cleaned her up inside and out today. Cut the stake body even with frame, stake body is in sad shape. Body looks real good, has some rust issues in the bottoms of fenders and sides of hood. Roof gutter is surfaced rusted, I will clean that up ASAP, treat the rust that I can't remove and seal it with some epoxy primer to keep it as good as possible. Posted via Mobile Device __________________ 04 Yukon XL 2500 w/ Quadrasteer 61 Chevy C60, 261 inline six 86 Chevy C20 2wd, Banks 6.2 05 GMC Sierra 2500hd Duramax Last edited by ETsC10; 06-01-2013 at 11:16 PM.

06-02-2013, 02:57 PM	#17
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,724	Re: My new truck Regardless of what you do with it ,you did good on it .Cant wait to see where this one goes .



Register or Log In To remove these advertisements.

06-02-2013, 05:48 PM	#18
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,094	Re: My new truck As your friend has mentioned, all the parts should be available with no problem. Although you may have to order them. There is a guy on another truck board I belong to who is pretty good at finding parts and the part numbers that you would need. Let us know if you need any extra help with it. There is also a Wheel expert on the other board. His name is Grigg. Both these guys are at Stovebolt.com in the Big Bolts section. Bill __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

07-22-2013, 07:33 PM	#19
Katrina/10 Registered User Join Date: Oct 2010 Location: Ocean Springs, MS Posts: 1,746	delete __________________ Gary 1971 Chevrolet C/10 1951 GMC 100 1977 GMC C15 1955 Chevrolet 3100 Last edited by Katrina/10; 07-22-2013 at 07:38 PM. Reason: delete

07-23-2013, 10:46 PM	#20
inthearmynow Registered User Join Date: Sep 2005 Location: FT Hood tx Posts: 25	Re: My new truck that's a nice truck

08-04-2013, 07:42 PM	#21
oklalawnboy Registered User Join Date: Jan 2012 Location: Glencoe Alabama Posts: 510	Re: My new truck Great looking truck! I only wish I could find one like that. What a deal! __________________ 72 Cheyenne super 10 08 3500 HD 4dr dually 12 ford flex (wifes ride) 76 Monte Carlo 83 Chevy short wide Silverado 96 Mazda Miata, 2000 Allegro Bus

Register or Log In To remove these advertisements.