Wish I was in the market - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**LEEVON** · 08-07-2013, 05:23 PM

2013's are at $7500 incentive right now. I found (2) leftover 2013 LT, 2wd, short beds which sticker at $32k. Less $2500 from negotiation (or so), and the $7500 incentive you're at $22k. I have $2k GM points and about $8K in trade...so that would be around $12k financed plus whatever cash I would put down. That is soooo tempting!!! Lowered, cammed short beds with factory 20's are hard to beat.

But I've had (2) of the '07-up trucks, I just don't like the payment and it's currently my wife's turn in the nice/new category. Just had to come and be sad about this : (

http://www.chevroletoffayetteville.c...-10693428.html

Special-Ed · 08-10-2013, 01:28 PM

new models come out in 14 so you are getting a discount for the old model.

Low Elco · 08-21-2013, 01:10 PM

I wasn't... then I was, then I went to Houston last weekend. I should start a thread.

http://67-72chevytrucks.com/vboard/c...quot-3b&cat=15

**LEEVON** · 08-21-2013, 02:40 PM

Uh oh! More details please...how many miles on that beauty?

Low Elco · 08-21-2013, 02:47 PM

99k. No one believes it. It's nice!
Posted via Mobile Device

piecesparts · 08-21-2013, 03:56 PM

I have a 2011 black short wide with 20s and a 5/7 drop. You are absolutely right ---Looks great, drives great, runs great with the EFI Live tune in it.

Low Elco · 08-21-2013, 08:07 PM

Frank's not kidding-his truck is niiiiice!
Posted via Mobile Device

piecesparts · 08-21-2013, 08:38 PM

I don't have many pictures of the GMC, but it now has Akuza 20" six spoke rims with 265/50/20 Nitto tires on it. The cab has had the cloth seats changed over to leather and the stereo is now a Pioneer unit. I have installed a set of Kooks long tube headers going into a Magnaflow muffler and dual exhaust outlets on the 5.3 and the engine is tuned and the fuel cut off is removed. The factory rims were 20", so it was easy to change over to the new chrome rims. I have also removed all of the lettering and sticky stuff on the outside of the truck, while also changing the front grille out for an aluminum billet one. The elephant ear mirrors are now in a box in the attic of the garage. They were replaced with a set from Street Scene.

The headlights are now 80 watt low beam and 100 watt high beam bulbs with a set of Vision X LED fog lights. I can see things on a highway that many will not see. If you adjust them right, they do not blind others.

Low Elco · 08-21-2013, 08:50 PM

Can the tune guy tighten up the 6 speed?
Posted via Mobile Device

piecesparts · 08-22-2013, 06:50 AM

Quote:

Originally Posted by Low Elco

Can the tune guy tighten up the 6 speed?
Posted via Mobile Device

Yes he has the ability to adjust the shift setpoints on the tranny. There is one thing to consider, the trannys in these trucks are good, but if you tighten them up too much, you could overstress them under hard abuse. We did close up the shift points and stopped the tranny flair issues that the 6 speeds tend to have. Also getting the fuel map and timing advance set to where it is optimal will make the tranny shift so much more efficiently. My truck has the capability to do fun thingsl like burn outs, but it tends to stick those tires to the ground and just accelerate hard with the tune.

Low Elco · 08-22-2013, 08:23 AM

Are you comin' to the nats, Frank? Is your son? I'll be there with my laptop and a stenographer, crawling all over your truck. Who is your tune guy? The tranny flair issues are KILLING me. It's a new experience coming from the t350/700r world. Always shifting gears, and it kicks down 2 in stages when ya wanna go! Just takes getting used to. WOW, this truck is tall. Thanks for all the help so far.

piecesparts · 08-22-2013, 04:08 PM

The guy that does the tuning is Anthony Dreiling. He lives in a small community (Tecumseh) just outside of Topeka, Kansas. He works during the week at Forbes Field on instrumentation repairs. He is retired Air Force and has a good background in electronics. He works out of his two car garage and does a lot of LS engine installs and tuning for everyone in the northeast Kansas area.

He is usually free Fridays and Saturdays, unless his family has something large to do.

His phone number is 785-608-1342
E-mail aknovaman@gmail.com

I am supposed to be at the Nats. Not sure about my son. The cost of gas may be prohibitive unless he drives my 2011 and I drive my 84 truck up.

Low Elco · 08-23-2013, 08:21 AM

Thanks for the hook-up! I'll have to give him a call. I've never done this before, is it while you wait?

piecesparts · 08-23-2013, 09:43 AM

My first time with him, he came to my house on a Sunday and did my Pontiac G8 and two other vehicles. I now just go to his home and 45 minutes later, with some road time with him at the wheel and the laptop, he can make changes that you would like. If you have an issue later, he still has your initial tune and can modify it to make those changes.

I chose to change my tire size and we reprogrammed the speedo to match that, we also moved the fuel cutoff point from that stupid 93 MPH to a place that will never get in my way. Tighter shift points, and in my case changed the displacement on demand to where it does not irritate me. We adjusted the fuel curve to support my CAI and the headers and exhaust that I installed.

NOTE: This is a thing that you should think about before doing. You can buy programmers at just about any truck supply outlet and there is always a warning on those units, that the Manufacturer may not support any computer warranty issues after that. I went forward anyways and I have 78,000 miles on my truck and I personally am not sorry that I did it. The improvements in performance and shifting was worth it to me. Oh and by the way, Anthony charges around $180.00 to do his tune---not the $300+ that a Diablo or other brand would cost. Yes, you have to go to him, but it is not that complicated for me.

Low Elco · 08-23-2013, 10:32 AM

Well, the cool thing ( I guess) is that I have 99,300 on it, so warranty went by the wayside looooong ago. Sounds like a cool idea, thanks again!

**N2TRUX** · 08-23-2013, 01:02 PM

Quote:

Originally Posted by Low Elco

.... Just takes getting used to. WOW, this truck is tall. Thanks for all the help so far.

And I left the lowering shackle on it. Imagine what it would feel like with out that. Did you notice my 13 looking like a 4wd?

Low Elco · 08-23-2013, 01:45 PM

Yep, they're all kinda tall! #1 comment: Nice truck! When ya gonna drop it? LoL! I promise, I'll make a road trip thread soon as I get this pic bidness figgered out. It settles on real good around 87. Allen to Lees Summit in 7 hrs flat with 4 stops. Thanks again for the great experience! It's nice to be around good folks that take care of bidness.
Posted via Mobile Device

08-10-2013, 01:28 PM	#2
Special-Ed Registered User Join Date: Jul 2013 Location: Floriduh Posts: 386	Re: Wish I was in the market new models come out in 14 so you are getting a discount for the old model. __________________ Ed will be known as the Tiger Woods of the integration business

08-21-2013, 01:10 PM	#3
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market I wasn't... then I was, then I went to Houston last weekend. I should start a thread. http://67-72chevytrucks.com/vboard/c...quot-3b&cat=15 __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-21-2013, 02:40 PM	#4
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Re: Wish I was in the market Uh oh! More details please...how many miles on that beauty? __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

08-21-2013, 02:47 PM	#5
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market 99k. No one believes it. It's nice! Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-21-2013, 03:56 PM	#6
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Wish I was in the market I have a 2011 black short wide with 20s and a 5/7 drop. You are absolutely right ---Looks great, drives great, runs great with the EFI Live tune in it. __________________ Frank

08-07-2013, 05:23 PM	#1
LEEVON Moderator Join Date: Jul 2006 Location: Ozark, MO Posts: 4,888	Wish I was in the market 2013's are at $7500 incentive right now. I found (2) leftover 2013 LT, 2wd, short beds which sticker at $32k. Less $2500 from negotiation (or so), and the $7500 incentive you're at $22k. I have $2k GM points and about $8K in trade...so that would be around $12k financed plus whatever cash I would put down. That is soooo tempting!!! Lowered, cammed short beds with factory 20's are hard to beat. But I've had (2) of the '07-up trucks, I just don't like the payment and it's currently my wife's turn in the nice/new category. Just had to come and be sad about this : ( http://www.chevroletoffayetteville.c...-10693428.html __________________ '20 Silverado Trail Boss ~ '17 Tahoe ~ '79 K15 Sierra Grande ~ '76 Blazer 2wd ~ '71 Cheyenne swb ~ '55 Pontiac Safari ~'50 3100 bagged ~ '80 Wife ~ Late model kids

08-21-2013, 08:07 PM	#7
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Frank's not kidding-his truck is niiiiice! Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-21-2013, 08:38 PM	#8
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Wish I was in the market I don't have many pictures of the GMC, but it now has Akuza 20" six spoke rims with 265/50/20 Nitto tires on it. The cab has had the cloth seats changed over to leather and the stereo is now a Pioneer unit. I have installed a set of Kooks long tube headers going into a Magnaflow muffler and dual exhaust outlets on the 5.3 and the engine is tuned and the fuel cut off is removed. The factory rims were 20", so it was easy to change over to the new chrome rims. I have also removed all of the lettering and sticky stuff on the outside of the truck, while also changing the front grille out for an aluminum billet one. The elephant ear mirrors are now in a box in the attic of the garage. They were replaced with a set from Street Scene. The headlights are now 80 watt low beam and 100 watt high beam bulbs with a set of Vision X LED fog lights. I can see things on a highway that many will not see. If you adjust them right, they do not blind others. Attached Images __________________ Frank Last edited by piecesparts; 08-21-2013 at 08:45 PM.

08-21-2013, 08:50 PM	#9
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Can the tune guy tighten up the 6 speed? Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-22-2013, 08:23 AM	#11
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Are you comin' to the nats, Frank? Is your son? I'll be there with my laptop and a stenographer, crawling all over your truck. Who is your tune guy? The tranny flair issues are KILLING me. It's a new experience coming from the t350/700r world. Always shifting gears, and it kicks down 2 in stages when ya wanna go! Just takes getting used to. WOW, this truck is tall. Thanks for all the help so far. __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-22-2013, 04:08 PM	#12
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Wish I was in the market The guy that does the tuning is Anthony Dreiling. He lives in a small community (Tecumseh) just outside of Topeka, Kansas. He works during the week at Forbes Field on instrumentation repairs. He is retired Air Force and has a good background in electronics. He works out of his two car garage and does a lot of LS engine installs and tuning for everyone in the northeast Kansas area. He is usually free Fridays and Saturdays, unless his family has something large to do. His phone number is 785-608-1342 E-mail aknovaman@gmail.com I am supposed to be at the Nats. Not sure about my son. The cost of gas may be prohibitive unless he drives my 2011 and I drive my 84 truck up. __________________ Frank

08-23-2013, 08:21 AM	#13
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Thanks for the hook-up! I'll have to give him a call. I've never done this before, is it while you wait? __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-23-2013, 09:43 AM	#14
piecesparts Parts and more parts Join Date: Nov 2003 Location: Lebo, Kansas (middle of nowhere Posts: 6,821	Re: Wish I was in the market My first time with him, he came to my house on a Sunday and did my Pontiac G8 and two other vehicles. I now just go to his home and 45 minutes later, with some road time with him at the wheel and the laptop, he can make changes that you would like. If you have an issue later, he still has your initial tune and can modify it to make those changes. I chose to change my tire size and we reprogrammed the speedo to match that, we also moved the fuel cutoff point from that stupid 93 MPH to a place that will never get in my way. Tighter shift points, and in my case changed the displacement on demand to where it does not irritate me. We adjusted the fuel curve to support my CAI and the headers and exhaust that I installed. NOTE: This is a thing that you should think about before doing. You can buy programmers at just about any truck supply outlet and there is always a warning on those units, that the Manufacturer may not support any computer warranty issues after that. I went forward anyways and I have 78,000 miles on my truck and I personally am not sorry that I did it. The improvements in performance and shifting was worth it to me. Oh and by the way, Anthony charges around $180.00 to do his tune---not the $300+ that a Diablo or other brand would cost. Yes, you have to go to him, but it is not that complicated for me. __________________ Frank

08-23-2013, 10:32 AM	#15
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Well, the cool thing ( I guess) is that I have 99,300 on it, so warranty went by the wayside looooong ago. Sounds like a cool idea, thanks again! __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!

08-23-2013, 01:45 PM	#17
Low Elco Registered User Join Date: Apr 2003 Location: Indep, MO Posts: 5,893	Re: Wish I was in the market Yep, they're all kinda tall! #1 comment: Nice truck! When ya gonna drop it? LoL! I promise, I'll make a road trip thread soon as I get this pic bidness figgered out. It settles on real good around 87. Allen to Lees Summit in 7 hrs flat with 4 stops. Thanks again for the great experience! It's nice to be around good folks that take care of bidness. Posted via Mobile Device __________________ Boppa's Old Yeller Truck Build, Old Yeller's New Heart! Project Buzz Bomb Flyin' Low!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.