Convert to one piece rear main to swap in a 6 speed? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rob68c10 · 08-23-2013, 09:29 PM

Hey guys I have a line on a bell housing, clutch, flywheel, pressure plate, and clutch fork out of a '90 corvette. The guy wants 500 bucks for it. Says the parts are good/like new.

My question deals with the rear main seal. The vette motor had a 1 piece rear main and I plan to run a '66 327. Can I convert to a one piece seal? Is there an easier option?

patdaly · 08-23-2013, 09:36 PM

A 90 6 speed would have been the old style unit, you can use a standard car flywheel and clutch, I don't think the bigger truck 14" flywheel will clear though.

When they changed to the LS series is when it became more difficult to swap.

**Ol Blue K20** · 08-23-2013, 10:04 PM

You won't be able to use the one piece rear main fly wheel but an older fly wheel will work
Posted via Mobile Device

mmiddle · 08-23-2013, 10:13 PM

The crank shaft is different on a "one-piece" rear main seal engine. There is no way unless you change cranks. You can have a special crank made by Lunati and some of the others to have a 327with a one piece seal.

**Ol Blue K20** · 08-23-2013, 10:42 PM

That's a lot a work though it would be easier to change to a old style flywheel and go
Posted via Mobile Device

08-23-2013, 09:29 PM	#1
Rob68c10 Registered User Join Date: Mar 2010 Location: Eastern Shore, Maryland Posts: 159	Convert to one piece rear main to swap in a 6 speed? Hey guys I have a line on a bell housing, clutch, flywheel, pressure plate, and clutch fork out of a '90 corvette. The guy wants 500 bucks for it. Says the parts are good/like new. My question deals with the rear main seal. The vette motor had a 1 piece rear main and I plan to run a '66 327. Can I convert to a one piece seal? Is there an easier option?

08-23-2013, 09:36 PM	#2
patdaly Registered User Join Date: Jul 2013 Location: Streator Illinois Posts: 61	Re: Convert to one piece rear main to swap in a 6 speed? A 90 6 speed would have been the old style unit, you can use a standard car flywheel and clutch, I don't think the bigger truck 14" flywheel will clear though. When they changed to the LS series is when it became more difficult to swap.

08-23-2013, 10:04 PM	#3
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,359	Re: Convert to one piece rear main to swap in a 6 speed? You won't be able to use the one piece rear main fly wheel but an older fly wheel will work Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

08-23-2013, 10:13 PM	#4
mmiddle Registered User Join Date: Jul 2013 Location: Forestburg, Texas Posts: 659	Re: Convert to one piece rear main to swap in a 6 speed? The crank shaft is different on a "one-piece" rear main seal engine. There is no way unless you change cranks. You can have a special crank made by Lunati and some of the others to have a 327with a one piece seal. __________________ Mark Jesus is the Way! 2003 2500HD CCLB Duramax/Ali (Clifford) 2014 2SS/RS black on black Camaro (Betty) 2006 Pontiac SOLSTICE silver/black (Lula-Bell) 1970 C/10 Short Wide (Peggy) 1964 C/10 Short Step (Hambone) RIP Jimmy Hamilton Thank you for the trucks

08-23-2013, 10:42 PM	#5
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,359	Re: Convert to one piece rear main to swap in a 6 speed? That's a lot a work though it would be easier to change to a old style flywheel and go Posted via Mobile Device __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.