4l60e with np205 driveshaft clearance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Dale99 · 11-17-2013, 04:47 PM

So I just found out about the clearance issues with having a 4l60e and np205 where the front shaft has clearance issues with the pan.

Have found a few threads discussing this, but no pictures of what the solution/fix was. Please share your final pictures.

obijuan · 11-18-2013, 09:54 AM

Techpack fitzall spacer. Pushes the tcase back a couple inches. That works.

Also not using a cv front shaft helps as well.

Dale99 · 11-18-2013, 12:15 PM

I moved my whole engine forward so I could use the stock driveshafts w/o modification. But that may be a solution for someone else.

11-17-2013, 04:47 PM	#1
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	4l60e with np205 driveshaft clearance So I just found out about the clearance issues with having a 4l60e and np205 where the front shaft has clearance issues with the pan. Have found a few threads discussing this, but no pictures of what the solution/fix was. Please share your final pictures. __________________ 2008 Sierra k3500 LMM 1994 s10 blazer 4x4 1991 Camaro Vert Rusted in Half RIP 1972 Jimmy 4x4 L05,4L60E,np205http://67-72chevytrucks.com/vboard/s...d.php?t=546364 1967 C10 L6/3tree(dads truck)

11-18-2013, 09:54 AM	#2
obijuan Registered User Join Date: Jun 2012 Location: cibolo tx Posts: 1,033	Re: 4l60e with np205 driveshaft clearance Techpack fitzall spacer. Pushes the tcase back a couple inches. That works. Also not using a cv front shaft helps as well.

11-18-2013, 12:15 PM	#3
Dale99 Registered User Join Date: Nov 2007 Location: NLR, AR Posts: 1,387	Re: 4l60e with np205 driveshaft clearance I moved my whole engine forward so I could use the stock driveshafts w/o modification. But that may be a solution for someone else.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.