A few things I have made - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68anthony · 03-30-2013, 09:42 PM

The Aarm I made is a direct replacement for the stock one. I am going to use ball joints from a 72 since my truck is a 68 and I am putting disk brakes on it. I still might make a few changes to the arm and have yet to make the control arm shaft.

The Threaded bungs are for my trailing arms I will be using a 1inch heim for the front link.

The plates are for my cnotch.

broey · 03-30-2013, 11:22 PM

looks cool!

hopped up · 03-30-2013, 11:50 PM

Nice! You using a vf8? Haas?
Posted via Mobile Device

oldspowered67C10 · 03-31-2013, 12:37 AM

Nice work, I gotta get a mill someday.

68anthony · 03-31-2013, 01:07 AM

The Cnotch Plates I cut on a VF0 and the ball Joint mount on a VF4.
Here is a pic of the finished notch on the frame.

sqrlnts · 03-31-2013, 03:33 AM

Killer work, I want to own a mill before i die.

68anthony · 04-10-2013, 02:06 AM

Thank You, Yes having a mill is a great tool to have the possibilities are endless with the right tools.

68anthony · 12-01-2013, 12:47 AM

Here is a steering wheel I made for my dads 1941 Willys coupe. This was one big chunk of aluminum. I will post a finished picture when I can find one or just retake it.

**mac808** · 12-01-2013, 06:09 AM

DAAAAAAAAAAMN. Mad skills you got there, sir!

03-30-2013, 09:42 PM	#1
68anthony Registered User Join Date: Mar 2013 Location: Mesa az Posts: 66	A few things I have made The Aarm I made is a direct replacement for the stock one. I am going to use ball joints from a 72 since my truck is a 68 and I am putting disk brakes on it. I still might make a few changes to the arm and have yet to make the control arm shaft. The Threaded bungs are for my trailing arms I will be using a 1inch heim for the front link. The plates are for my cnotch. Attached Images

03-30-2013, 11:22 PM	#2
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: A few things I have made looks cool! __________________ Squarebody Syndicate

03-30-2013, 11:50 PM	#3
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: A few things I have made Nice! You using a vf8? Haas? Posted via Mobile Device

03-31-2013, 12:37 AM	#4
oldspowered67C10 Registered User Join Date: Jan 2006 Location: Cherry Valley,Ca Posts: 468	Re: A few things I have made Nice work, I gotta get a mill someday. __________________ Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=534956

03-31-2013, 01:07 AM	#5
68anthony Registered User Join Date: Mar 2013 Location: Mesa az Posts: 66	Re: A few things I have made The Cnotch Plates I cut on a VF0 and the ball Joint mount on a VF4. Here is a pic of the finished notch on the frame. Attached Images

03-31-2013, 03:33 AM	#6
sqrlnts Registered User Join Date: Apr 2009 Location: Chandler AZ Posts: 750	Re: A few things I have made Killer work, I want to own a mill before i die.

04-10-2013, 02:06 AM	#7
68anthony Registered User Join Date: Mar 2013 Location: Mesa az Posts: 66	Re: A few things I have made Thank You, Yes having a mill is a great tool to have the possibilities are endless with the right tools.

12-01-2013, 12:47 AM	#8
68anthony Registered User Join Date: Mar 2013 Location: Mesa az Posts: 66	Re: A few things I have made Here is a steering wheel I made for my dads 1941 Willys coupe. This was one big chunk of aluminum. I will post a finished picture when I can find one or just retake it. Attached Images

12-01-2013, 06:09 AM	#9
mac808 Senior Member Join Date: Nov 2010 Location: Honolulu Hawaii Posts: 313	Re: A few things I have made DAAAAAAAAAAMN. Mad skills you got there, sir!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.