AZ For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate shaft - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**1774btcrew** · 07-28-2012, 09:15 PM

I am relisting these columns as I now have Jeep intermediate shafts as an option for these to eliminate the sloppy rag joints.
1)First is a manual floor shift tilt steering column with key for the 78-83 trucks. It will work for 1978 and earlier with the correct intermediate shaft(I have this as well for an additional $20). When I purchased this steering column the lower collar that meets the dash bezel was cracked and missing pieces. To repair this I had to COMPLETELY disassemble this column. I replaced the broken collar, cleaned and regreased everything, and put loctite on the tilt mechanism bolts before carefully putting everything back together. This now works as new with no play. If you are familiar with these at all it is VERY time consuming and involved to take these completely apart and reassemble them correctly. For this reason I want $200 FIRM with the Jeep intermediate shaft $180 FIRM WITHOUT Jeep intermediate shaft NOT including shipping.

2)Next is a nice automatic tilt steering column for the 1984 and newer trucks. This was actually removed from a 1987. Column is in very good shape with NO wobble and includes the key. The lower bearing has been cleaned and regreased so everything turns nice and smooth. Price is $180 with Jeep Intermediate shaft that will eliminate your sloppy rag joint $160 without the intermediate shaft not including shipping.

**1774btcrew** · 08-19-2012, 11:36 AM

Both are still available!

**1774btcrew** · 08-24-2012, 08:48 PM

There have been a lot of people interested but no one has came through.

**1774btcrew** · 08-28-2012, 12:24 AM

ttt

**1774btcrew** · 09-06-2012, 11:01 AM

ttt

**1774btcrew** · 09-09-2012, 10:37 AM

Automatic column has been sold

**1774btcrew** · 09-20-2012, 11:09 AM

No one needs a nice steering column?

hayesperformanceplus · 09-21-2012, 11:57 AM

What type of jeep is that intermediate shaft from? I never knew they fit or that they were an upgrade for the later model columns.
Posted via Mobile Device

**1774btcrew** · 09-21-2012, 03:41 PM

It is from a Jeep Cherokee
Posted via Mobile Device

hayesperformanceplus · 12-04-2013, 01:16 AM

Do you have a Jeep intermediate shaft that will work with the 73-77 splined column?

If so, how much?

Thank you.
David

**1774btcrew** · 12-04-2013, 02:53 PM

Quote:

Originally Posted by hayesperformanceplus

Do you have a Jeep intermediate shaft that will work with the 73-77 splined column?

If so, how much?

Thank you.
David

David, There isn't a Jeep intermediate shaft that will work on the 1973-1977 splined columns. The only option is to actually buy Borgenson joints and make one. Either that or switch to a 78-83 steering column. This is what I had planned on doing on my 77 but came up with an aftermarket shaft that has Borgenson joints

hayesperformanceplus · 12-04-2013, 04:23 PM

Do you have the 78-83 Manual tilt column?

Thank you!

**1774btcrew** · 12-04-2013, 04:43 PM

All that I have built at this time for floor shift is 1973 to 77. It would take a couple days to build the 79-83 floor shift tilt

INSIDIOUS '86 · 12-08-2013, 04:55 PM

Could I buy the intermediate shaft from you possibly? Need it for my 86

07-28-2012, 09:15 PM	#1
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate shaft I am relisting these columns as I now have Jeep intermediate shafts as an option for these to eliminate the sloppy rag joints. 1)First is a manual floor shift tilt steering column with key for the 78-83 trucks. It will work for 1978 and earlier with the correct intermediate shaft(I have this as well for an additional $20). When I purchased this steering column the lower collar that meets the dash bezel was cracked and missing pieces. To repair this I had to COMPLETELY disassemble this column. I replaced the broken collar, cleaned and regreased everything, and put loctite on the tilt mechanism bolts before carefully putting everything back together. This now works as new with no play. If you are familiar with these at all it is VERY time consuming and involved to take these completely apart and reassemble them correctly. For this reason I want $200 FIRM with the Jeep intermediate shaft $180 FIRM WITHOUT Jeep intermediate shaft NOT including shipping. 2)Next is a nice automatic tilt steering column for the 1984 and newer trucks. This was actually removed from a 1987. Column is in very good shape with NO wobble and includes the key. The lower bearing has been cleaned and regreased so everything turns nice and smooth. Price is $180 with Jeep Intermediate shaft that will eliminate your sloppy rag joint $160 without the intermediate shaft not including shipping.

08-19-2012, 11:36 AM	#2
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha Both are still available!

08-24-2012, 08:48 PM	#3
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha There have been a lot of people interested but no one has came through.

08-28-2012, 12:24 AM	#4
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha ttt

09-06-2012, 11:01 AM	#5
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha ttt

09-09-2012, 10:37 AM	#6
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha Automatic column has been sold

09-20-2012, 11:09 AM	#7
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha No one needs a nice steering column?

09-21-2012, 11:57 AM	#8
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha What type of jeep is that intermediate shaft from? I never knew they fit or that they were an upgrade for the later model columns. Posted via Mobile Device __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

09-21-2012, 03:41 PM	#9
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha It is from a Jeep Cherokee Posted via Mobile Device

12-04-2013, 01:16 AM	#10
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha Do you have a Jeep intermediate shaft that will work with the 73-77 splined column? If so, how much? Thank you. David __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

12-04-2013, 04:23 PM	#12
hayesperformanceplus Performance Shop Owner Join Date: Oct 2009 Location: Edmonton, Alberta, CANADA Posts: 332	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha Do you have the 78-83 Manual tilt column? Thank you! __________________ 1980 GMC C25 Sierra Classic with 20,000 ORIGINAL MILES (32,000Km's) & Matching numbers 1977 GMC C35 Sierra Classic Crew Cab 454 A/C with 21,000 Miles & Matching numbers 1980 Chevrolet Silverado K20 400 4spd 4X4 74,000km's 1980 GMC C25 Sierra Classic CREW CAB, All Options, with 49,000 Miles 1979 GMC C15 Sierra Classic 454 1989 GMC R3500 CREW CAB 2003 Grand Prix GTP 1998 Regal GS

12-04-2013, 04:43 PM	#13
1774btcrew Senior Member Join Date: Jun 2009 Location: Phoenix AZ Posts: 4,603	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha All that I have built at this time for floor shift is 1973 to 77. It would take a couple days to build the 79-83 floor shift tilt __________________ AZPartsLocators on Instagram 1972 Cheyenne Super Short Bed big block "Blackie" 1977 Crew Cab GMC Short bed with 4BT Intercooled Cummins Diesel and a 4L80e "The Junkyard Dog" 1985 Crew Cab Chevy dually with 5.9 Cummins "The Big Dog" This is what my dad liked to be called by the grandkids before he passed so it seems fitting for his old truck.

12-08-2013, 04:55 PM	#14
INSIDIOUS '86 Registered User Join Date: Jul 2009 Location: washington Posts: 4,178	Re: For Sale Rebuilt Manual and Automatic Tilt Steering Columns Jeep intermediate sha Could I buy the intermediate shaft from you possibly? Need it for my 86 __________________ 377 sbc thumpr cam autogear m23 muncie 3:73 Detroit trutrac 3''spintech prostreet mufflers xpipe 1 3/4 headers build thread !http://67-72chevytrucks.com/vboard/s...d.php?t=577217 Iroc gauge threadhttp://67-72chevytrucks.com/vboard/s...d.php?t=554511



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.