Clutch fork

[the_goat_man]

I have a 66 c10 that I just picked up. And the clutch fork was not installed. It is an Muncie 4 speed. The motor and trans are installed. Was wondering if the clutch fork can be installed without pulling the trans out thanks clutch is installed

[1963c-10]

Clutch fork sits on the throw out bearing between the clutch and the transmission, so trans will have to come out.

Is it an older frame mounted bellhousing or a more modern style bellhousing that has the transmission w/the crossmember mount?

The frame mounted bellhousing has an access plate underneath, but I don't think you'll have room to get the clutch fork on the pivot ball and still on the throw out bearing. I still think it'll have to come out.