Shift lever question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Scrub · 12-18-2003, 06:38 PM

Hey Guys,

Im selling a shift lever setup on e-bay. It's out of a sm465 to NP205 setup. I have an interested bidder, but he needs to know if it will also fit a t350 to 205 setup. Anyone know

Thanks in advance

http://cgi.ebay.com/ebaymotors/ws/eB...tem=2449109185

pickupman · 12-18-2003, 07:10 PM

Yes, it will work for him. Your knob is not correct but the lever and linkage is.
Bill

ZOOMY · 12-18-2003, 10:42 PM

What's the high bid ? I need everything you have laying there. Can't get on e-bay right now......Zoomy

Scrub · 12-19-2003, 03:36 AM

Zoomy,
Sorry I didn't get back to you. The bid is 30 bucks and it closes on Sunday at 6:30 Oregon Time (PST).

I have another bare shift arm, but only one set of linkage.

1969 GMC · 12-19-2003, 04:29 AM

that knob looks like one from an NP203 truck

12-18-2003, 06:38 PM	#1
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Shift lever question Hey Guys, Im selling a shift lever setup on e-bay. It's out of a sm465 to NP205 setup. I have an interested bidder, but he needs to know if it will also fit a t350 to 205 setup. Anyone know Thanks in advance http://cgi.ebay.com/ebaymotors/ws/eB...tem=2449109185 Attached Images __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-18-2003, 07:10 PM	#2
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,097	Yes, it will work for him. Your knob is not correct but the lever and linkage is. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

12-18-2003, 10:42 PM	#3
ZOOMY Senior Member Join Date: Feb 2003 Location: WIS Posts: 1,752	bid What's the high bid ? I need everything you have laying there. Can't get on e-bay right now......Zoomy

12-19-2003, 03:36 AM	#4
Scrub Collector of rusty Items Join Date: Dec 2001 Location: Sisters,Oregon USA Posts: 731	Zoomy, Sorry I didn't get back to you. The bid is 30 bucks and it closes on Sunday at 6:30 Oregon Time (PST). I have another bare shift arm, but only one set of linkage. __________________ Scrub Sisters, Oregon - Home of the Sisters Rodeo. 70 GMC 1,000,000 + miles 72 K-20 project, 456 Dana60 front, Corp14 rear w/locker, 265R19.5 tires 20-ply. Warn 12k winches both ends, Cross-over steering with raised tie-rod, Powerbox steering, 4500 watt 120-AC power, Air, Hydraulic aux power, 4 inch lift, 5000 lb air-bags both ends.

12-19-2003, 04:29 AM	#5
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	that knob looks like one from an NP203 truck __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.