Rear bag mounting pics please - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pocketpool · 04-14-2009, 12:48 AM

the panhard bar hits the frame way before the axle bottoms out in the c-notch, you could get by without it but they are not that expensive.

pocketpool · 04-14-2009, 01:05 AM

i'll come up with some pics, another thing is the rearend is less than a inch from the bed floor.

badaceissimo · 05-06-2009, 08:12 AM

Quote:

Originally Posted by slammed65stepside

I'm new to the airbag suspension idea. Are the metal beams to the differential and axle for making sure the driveshaft doesn't pop out? I'm curious because I'd like to know if I need to price out the cost of putting that on a truck I want to raise from stock to 4" and back down. Thanks.

crispo-71 · 09-05-2011, 06:04 PM

Quote:

Originally Posted by tk-mpl

When you guys mount the front bags done you weld in the buttom cup or just let it move around??
Thanx
Trevor

hey question on that bottom cup for the bag.. i noticed there is a low spot on the control arm, it is not flat, wouldnt the cup tilt when bolted on??

ENHANCED AIR RIDE · 09-05-2011, 08:53 PM

No it will be just fine.

crispo-71 · 09-05-2011, 09:38 PM

ok.. question.. how wide are the cups??

*taank* · 11-17-2011, 07:39 PM

how many psi do you folks run the bags at?

broey · 11-17-2011, 08:50 PM

I run 3/8 line and my compressor turns on at 160 psi and turns off at 200 psi.

chevydog66 · 11-17-2011, 09:35 PM

I have Re7'z IIRC and I run mine about 70 psi. on my 72 GMC 1500 LWB. I have 1/2" line with comp's on at 140 and off at 160, I think.

Dustin07 · 11-18-2011, 11:00 AM

I never even bothered putting a gauge on my bags. I just aired them up to ride height, more or less, and drove.

83c10wit454 · 11-18-2011, 11:29 AM

So would i be correct saying that sleeve style bags are better for over the axle mounting and that double conv. bags are good for mounting on trailing arms?

SCOTI · 11-18-2011, 11:48 AM

Quote:

Originally Posted by 83c10wit454

So would i be correct saying that sleeve style bags are better for over the axle mounting and that double conv. bags are good for mounting on trailing arms?

Correct.

BigDaddyV · 12-31-2013, 07:37 AM

Anymore custom bag mounts & frames?

Blackpony · 01-02-2014, 11:34 PM

I am gathering parts up to do a four link with phb and bags on my c10. Is there any way to help determine how tall the bags will be with and what psi they will need for good ride quality?

04-14-2009, 12:48 AM	#101
pocketpool Registered User Join Date: Apr 2008 Location: ozark mo. Posts: 586	Re: Rear bag mounting pics please the panhard bar hits the frame way before the axle bottoms out in the c-notch, you could get by without it but they are not that expensive.

04-14-2009, 01:05 AM	#102
pocketpool Registered User Join Date: Apr 2008 Location: ozark mo. Posts: 586	Re: Rear bag mounting pics please i'll come up with some pics, another thing is the rearend is less than a inch from the bed floor.

09-05-2011, 08:53 PM	#105
ENHANCED AIR RIDE Registered User Join Date: Oct 2008 Location: Largo, Florida Posts: 158	Re: Rear bag mounting pics please No it will be just fine.

09-05-2011, 09:38 PM	#106
crispo-71 Registered User Join Date: Jun 2011 Location: new braunfels tx Posts: 57	Re: Rear bag mounting pics please ok.. question.. how wide are the cups??

11-17-2011, 07:39 PM	#107
taank Account Suspended Join Date: Mar 2011 Location: hastings mn Posts: 186	Re: Rear bag mounting pics please how many psi do you folks run the bags at?

11-17-2011, 08:50 PM	#108
broey Square Join Date: Feb 2011 Location: Phoenix Arizona Posts: 1,568	Re: Rear bag mounting pics please I run 3/8 line and my compressor turns on at 160 psi and turns off at 200 psi. __________________ Squarebody Syndicate

11-17-2011, 09:35 PM	#109
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: Rear bag mounting pics please I have Re7'z IIRC and I run mine about 70 psi. on my 72 GMC 1500 LWB. I have 1/2" line with comp's on at 140 and off at 160, I think. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

11-18-2011, 11:00 AM	#110
Dustin07 Stirrer of the Pot Join Date: Mar 2008 Location: washington Posts: 477	Re: Rear bag mounting pics please I never even bothered putting a gauge on my bags. I just aired them up to ride height, more or less, and drove.

11-18-2011, 11:29 AM	#111
83c10wit454 Registered User Join Date: Aug 2010 Location: Lexington NE Posts: 122	Re: Rear bag mounting pics please So would i be correct saying that sleeve style bags are better for over the axle mounting and that double conv. bags are good for mounting on trailing arms?

12-31-2013, 07:37 AM	#113
BigDaddyV Registered User Join Date: Mar 2013 Location: Grand Island, Ne. Posts: 1,110	Re: Rear bag mounting pics please Anymore custom bag mounts & frames? __________________ *J. Vess, 6'6", Gearhead, Welder, Fabricator, Nutcase* 1955 Chevy Stepside "Dudley" My daily http://www.67-72chevytrucks.com/vboa...d.php?t=760288 1972 Chevy C10, Project "Chevro~Layed out" Nether Storm Build Thread http://67-72chevytrucks.com/vboard/s...23#post6007523

01-02-2014, 11:34 PM	#114
Blackpony Registered User Join Date: Feb 2013 Location: Aubrey, TX Posts: 308	Re: Rear bag mounting pics please I am gathering parts up to do a four link with phb and bags on my c10. Is there any way to help determine how tall the bags will be with and what psi they will need for good ride quality?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.