Bolt in low hump tranny cover? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Topfuelflat · 01-08-2014, 04:12 AM

For those who don't believe that they exist- they do, my 72 2/wdr came from the factory with one.

'Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

jjzepplin · 01-08-2014, 04:46 AM

I made mine from another members floor section from a doner cab.

bouncytruck · 01-08-2014, 10:42 AM

Won't a PU low hump fit?

Topfuelflat · 01-08-2014, 12:22 PM

I would guess that one out of a truck would be the same.

bouncytruck · 01-08-2014, 11:48 PM

Check with Wes at http://www.classicheartbeat.com/ in Olympia. He used to sell used parts, but I'm not sure if he still does.

ETsC10 · 01-12-2014, 08:45 PM

Check with Frank (PICKMUP) too. Also in Olympia.

http://67-72chevytrucks.com/vboard/member.php?u=1330

**too much stuff** · 01-13-2014, 10:13 AM

I have never seen a bolt in low hump from the factory. Far as i know it would have been molded in as part of the floor.

Topfuelflat · 01-14-2014, 05:08 PM

I got my original one back, Thanks for everyones help.

**too much stuff** · 01-14-2014, 06:04 PM

Quote:

Originally Posted by Topfuelflat

I got my original one back, Thanks for everyones help.

Can you post up a pic? I have never seen a low hump bolt in cover.

Topfuelflat · 01-15-2014, 10:46 PM

I will post a pic this weekend.

**too much stuff** · 01-25-2014, 01:08 PM

Quote:

Originally Posted by Topfuelflat

I will post a pic this weekend.

Any luck with pics?

Topfuelflat · 01-25-2014, 06:46 PM

I hadn't seen this piece in quite a while and remembered that it was factory, but after further inspection, its pretty obvious that its custom made. Sorry for the misinformation, I hate being wrong

**too much stuff** · 01-25-2014, 08:49 PM

Quote:

Originally Posted by Topfuelflat

I hadn't seen this piece in quite a while and remembered that it was factory, but after further inspection, its pretty obvious that its custom made. Sorry for the misinformation, I hate being wrong

No problem, i was hoping you had something i hadn't seen before. And you were right, it is a bolt in low hump cover... Thanks for the pics.

Topfuelflat · 01-26-2014, 02:39 AM

Its surprising that no companies stamp these out, I would think it would be worth the while.

01-08-2014, 04:12 AM	#1
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Bolt in low hump tranny cover? For those who don't believe that they exist- they do, my 72 2/wdr came from the factory with one. 'Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. __________________ 72low Last edited by ETsC10; 01-13-2014 at 11:17 AM. Reason: removed wtb

01-08-2014, 04:46 AM	#2
jjzepplin Registered User Join Date: Feb 2012 Location: Ruskin Florida Posts: 4,566	Re: Bolt in low hump tranny cover needed I made mine from another members floor section from a doner cab. __________________ 70 swb 4x4 406sbc 700r4 203/205 d60/14blt locker yadda yadda http://67-72chevytrucks.com/vboard/s...88#post6935688 Yeller 72 Blazer 2wd conversion project "No Daggum Money" http://67-72chevytrucks.com/vboard/s...d.php?t=550804 LS1-T56 3.73 LSD super budget build Blanco-2014 Sierra SWB https://67-72chevytrucks.com/vboard/...d.php?t=810350

01-08-2014, 10:42 AM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Bolt in low hump tranny cover needed Won't a PU low hump fit? __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-08-2014, 12:22 PM	#4
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Re: Bolt in low hump tranny cover needed I would guess that one out of a truck would be the same. __________________ 72low

01-08-2014, 11:48 PM	#5
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,038	Re: Bolt in low hump tranny cover needed Check with Wes at http://www.classicheartbeat.com/ in Olympia. He used to sell used parts, but I'm not sure if he still does. __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-12-2014, 08:45 PM	#6
ETsC10 Hand Crafted C-10 Join Date: Aug 2006 Location: Burien, WA Posts: 5,180	Re: Bolt in low hump tranny cover needed Check with Frank (PICKMUP) too. Also in Olympia. http://67-72chevytrucks.com/vboard/member.php?u=1330

01-13-2014, 10:13 AM	#7
too much stuff Roadtrip! Join Date: Feb 2003 Location: Grand Rapids MN Posts: 13,787	Re: Bolt in low hump tranny cover needed I have never seen a bolt in low hump from the factory. Far as i know it would have been molded in as part of the floor. __________________ 67 gmc custom lwb dakota truck. Sold...And bought back 69 swb 4x4 project (in progress) 70 c-10 lwb texas truck 70 4x4/BB/bkts/posi/tach(retired) 70 swb (wifes) 70 jimmy camper 71 K-5 factory 2wd 71 cheyenne 4x4/tach/posi/ plow rig 71 Cheyenne20 BB, buckets, tach, tilt, 4 speed 72 jimmy CST wyoming rig 72 jimmy Colorado rig 72 lifted texas 4x4 3/4 ton burb 65 fury conv. 383/auto 65 chrysler 300 "L" 413 auto

01-14-2014, 05:08 PM	#8
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Re: Bolt in low hump tranny cover? I got my original one back, Thanks for everyones help. __________________ 72low

01-15-2014, 10:46 PM	#10
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Re: Bolt in low hump tranny cover? I will post a pic this weekend. __________________ 72low

01-25-2014, 06:46 PM	#12
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Re: Bolt in low hump tranny cover? I hadn't seen this piece in quite a while and remembered that it was factory, but after further inspection, its pretty obvious that its custom made. Sorry for the misinformation, I hate being wrong Attached Images __________________ 72low

01-26-2014, 02:39 AM	#14
Topfuelflat Registered User Join Date: Mar 2002 Location: port orchard wa USA Posts: 52	Re: Bolt in low hump tranny cover? Its surprising that no companies stamp these out, I would think it would be worth the while. __________________ 72low



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.