sliding window questions - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rossboss · 02-08-2013, 01:06 PM

I've got a few questions concerning the rear slider window. On the rear slider portion of the rear set of sliding windows the glass offsets up about a 1/2". Lodged in that area I found this short piece of stainless with a piece of rubber stapled to it. I haven't any idea what it's for or why it's there. By looking at it I'm pretty sure it has something to do with why the glass offsets up. Does anyone know what it's for or why the glass offsets up, all I can do is scratch my head. I've attatched a few picture to give you an idea of what I'm talking about.
I'm in the process of rebuilding my sliding window frames. The frames are in excellent shape but the glass run channels and the pieces of beltline are really bad. Has anyone rebuilt these before and what did they use part numbers would be helpful.

**aerotruk63** · 02-08-2013, 01:18 PM

**aerotruk63** · 02-08-2013, 01:19 PM

rossboss · 02-08-2013, 01:30 PM

I've looked at these pictures before but see no sign of the piece I'm looking for. Someone has had to of run acrose this piece before, it's definatly factory installed. I just don't know where.

**aerotruk63** · 02-08-2013, 01:45 PM

Looks like a bumper so the sliding glass does not impact the frame. Just guessing.

MikeS. · 02-09-2013, 12:48 AM

Quote:

Originally Posted by rossboss

I've got a few questions concerning the rear slider window. On the rear slider portion of the rear set of sliding windows the glass offsets up about a 1/2". Lodged in that area I found this short piece of stainless with a piece of rubber stapled to it. I haven't any idea what it's for or why it's there. By looking at it I'm pretty sure it has something to do with why the glass offsets up. Does anyone know what it's for or why the glass offsets up, all I can do is scratch my head. I've attatched a few picture to give you an idea of what I'm talking about.
I'm in the process of rebuilding my sliding window frames. The frames are in excellent shape but the glass run channels and the pieces of beltline are really bad. Has anyone rebuilt these before and what did they use part numbers would be helpful.

The top 2 pieces look like the main parts to the slider locks. To me at least.
Posted via Mobile Device

**Captainfab** · 02-09-2013, 01:20 AM

I'm trying to remember where that parts goes, but I can't think of it at the moment.

If I remember correctly, the Truck Shop in Orange Ca. sells rebuild seals and gasket kits for the Suburban sliders. Also, if you go to one of the weather stripping suppliers, you should be able to find most if not all of the individual pieces you will need. I have bought the glass run channels for the sliders in 8 foot lengths, at a local swap meet from a weather stripping supplier. I just don't have a part number for it.

**Corts60** · 02-09-2013, 09:06 AM

I will have to look, but I know what piec you're talking about because I am rebuilding my sliders right now. I'll see if I can get a good pic for ya.
Posted via Mobile Device

65chevysub · 02-16-2013, 05:09 PM

I had to replace one of my channels, so I went to the hardware store with a piece of the original channel, and got some new channel, cut it to size and it's in there to this day...about 20 years now.

Dsuper5 · 02-13-2014, 10:04 PM

Hi rossboss
did you figure out where that part goes ? Let me know if not i have some pics for you, i am working on my burbs sliders and found what you are looking for.

rossboss · 02-15-2014, 10:57 AM

I never did get an answer as to where that piece goes. I rebuilt all my sliders and could never figure out where it goes so I did without, but would still like to kinow.

Dsuper5 · 02-15-2014, 01:24 PM

Ok I will post some pics for you later in the day.

02-08-2013, 01:06 PM	#1
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	sliding window questions I've got a few questions concerning the rear slider window. On the rear slider portion of the rear set of sliding windows the glass offsets up about a 1/2". Lodged in that area I found this short piece of stainless with a piece of rubber stapled to it. I haven't any idea what it's for or why it's there. By looking at it I'm pretty sure it has something to do with why the glass offsets up. Does anyone know what it's for or why the glass offsets up, all I can do is scratch my head. I've attatched a few picture to give you an idea of what I'm talking about. I'm in the process of rebuilding my sliding window frames. The frames are in excellent shape but the glass run channels and the pieces of beltline are really bad. Has anyone rebuilt these before and what did they use part numbers would be helpful. Attached Images

02-08-2013, 01:18 PM	#2
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: sliding window questions __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-08-2013, 01:19 PM	#3
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: sliding window questions __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-08-2013, 01:30 PM	#4
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Re: sliding window questions I've looked at these pictures before but see no sign of the piece I'm looking for. Someone has had to of run acrose this piece before, it's definatly factory installed. I just don't know where.

02-08-2013, 01:45 PM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: sliding window questions Looks like a bumper so the sliding glass does not impact the frame. Just guessing. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

02-09-2013, 01:20 AM	#7
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: sliding window questions I'm trying to remember where that parts goes, but I can't think of it at the moment. If I remember correctly, the Truck Shop in Orange Ca. sells rebuild seals and gasket kits for the Suburban sliders. Also, if you go to one of the weather stripping suppliers, you should be able to find most if not all of the individual pieces you will need. I have bought the glass run channels for the sliders in 8 foot lengths, at a local swap meet from a weather stripping supplier. I just don't have a part number for it. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-09-2013, 09:06 AM	#8
Corts60 Just here to tinker Join Date: Jun 2008 Location: Holland, MI Posts: 3,697	Re: sliding window questions I will have to look, but I know what piec you're talking about because I am rebuilding my sliders right now. I'll see if I can get a good pic for ya. Posted via Mobile Device __________________ 78 C10 SWB Diesel #1 (wrecked)http://67-72chevytrucks.com/vboard/s...1978+silverado 78 C10 SWB Diesel #2 (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=650751 60 GMC Suburban (sold)http://67-72chevytrucks.com/vboard/s...d.php?t=445526 60 GMC 1000 (sold)http://67-72chevytrucks.com/vboard/showthread.php?t=298235 67 GMC 1500 (sold) http://67-72chevytrucks.com/vboard/s...d.php?t=803695 73 Chevy C20(Daily)http://67-72chevytrucks.com/vboard/s...d.php?t=852767 86 Suburban(summer unit) http://67-72chevytrucks.com/vboard/s...d.php?t=810697 88 Suburban 4x4(sold)

02-16-2013, 05:09 PM	#9
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,382	Re: sliding window questions I had to replace one of my channels, so I went to the hardware store with a piece of the original channel, and got some new channel, cut it to size and it's in there to this day...about 20 years now.

02-13-2014, 10:04 PM	#10
Dsuper5 Registered User Join Date: Aug 2012 Location: Page AZ Posts: 131	Re: sliding window questions Hi rossboss did you figure out where that part goes ? Let me know if not i have some pics for you, i am working on my burbs sliders and found what you are looking for.

02-15-2014, 10:57 AM	#11
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Re: sliding window questions I never did get an answer as to where that piece goes. I rebuilt all my sliders and could never figure out where it goes so I did without, but would still like to kinow.

02-15-2014, 01:24 PM	#12
Dsuper5 Registered User Join Date: Aug 2012 Location: Page AZ Posts: 131	Re: sliding window questions Ok I will post some pics for you later in the day.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.